Denon DN-S3500 User Manual download pdf (Page 17)

ENGLISH

Adjust sound level

The Sampler playback sound level can be adjusted.

!3 Push the PITCH/VOL. button again when the pitch

input mode, the sound level input mode is set,

PARAMETERS LED flashes and the current

settings are displayed on the character display.

• Start Sampler playback.

!4 Tu rning the PARAMETERS knob can change the

output sound level.

!5 Push the PITCH/VOL. button again to turn the

sound level input mode off.

Adjust pitch

The Sampler playback pitch can be adjusted.

!1 Push the PITCH/VOL. button, the pitch input mode

is set, PARAMETERS LED flashes and the current

settings are displayed on the character display.

• Start Sampler playback.

!2 Tu rning the PARAMETERS knob can change the

pitch.

✽

When pushing down and turning the PARAMETERS

knob, you can change the pitch range 10 times

faster.

Exit and Reloop

The EXIT/RELOOP button

can be used same as

Seamless Loop function.

Reverse Play

i You can play the Sampled

sound in reverse by pushing

the REV button. In reverse

play mode REV LED lights

up and the platter spins

backwards.

• Reverse playback will take affect when

you push the SAMP button after reverse

mode has been turned on. To return to

normal forward playback, push the REV

button once again.

Clearing the Sampler data

!0 During the Sampler stop mode, press the

REV/(CLR) button, while pushing the SAMP

button to clear the Sampler.

•Or, by pushing the REV/(CLR) button for

more than. 1 sec, you can clear Sampler.

Moving Sampler B point

o When the B button is

pushed during Sampler

playback, the B point

moves to the point at which

the button was pushed, and

loop playback from point A starts.

RELOOP

EXIT/

CLR

REV.

SAMP.

CLR

REV.

B TRIM

PITCH/

q, r, !0, !6, !7

i, !0

!1, !3, !5, !6

y, u

w, o, !6

e, t, !7

ARAMETER

REL

OOP

EXIT

FILE

EAR

BTRIM

REL

CON

!2, !4

Record in Sampler

q When the SAMP button is

pushed in the standby or

play mode, the sound from

SAMP point is recorded to

Sampler memory up to 15

seconds.

• The SAMP button is flashing while

recording and a 15 sec REC countdown

display will appear. When the recording is

completed, the button turns off and the

corresponding SAMP B LED lights up.

• The remain time of the Sampler memory

is displayed in the character display.

Play Sampler sound

r Playback of the Sampler

sound starts when the

SAMP button is pushed

after recording has

stopped.

• Sampler playback continues looping.

When setting a B point, playback loops

between A and B point. Without a B point

the Sampler loops the whole recorded

length (about 15 seconds).

t To stop the Sampler sound

push the STOP button.

• Stutter playback of the

sample is possible when

the STOP button is

pushed repeatedly in the STOP mode.

SAMP.

Stop recording

e To stop the sampler

recording, press the STOP

button at any time prior to

15 sec.

• The EXIT/RELOOP LED

light to indicates Sampler Loop mode is

set automatically.

SAMP.

STOP

DN-S3500 has one Sampler of 15 seconds in length. This Sampler can also be looped and scratched during playback.

Setting B point

w When the B button is

pushed during Sampler

recording, the Sampler

Loop B point is set and the

loop mode turns on.

• Recording continues for approximately 15

seconds without stopping after set B

point.

• If the B point is not set, the recording end

point is set as your B point automatically.

Also EXIT/RELOOP LED light to indicates

Sampler Loop mode is set automatically.

Select Sampler Loop mode

You can select 1 of 3 playback modes for

Sampler when the Sampler is not playing.

Loop! (default):

Sampler playback continues with

looping.

(EXIT/RELOOP LED stays lit)

Single All!:

Sampler playback continues over B

point up to recording length.

(EXIT/RELOOP LED flashes)

Single B!:

Sampler playback stops at B point.

(EXIT/RELOOP LED turned off)

To select loop mode, push

EXIT/RELOOP button after

recording and before playing.

RELOOP

EXIT/

STOP

SAMPLER

Copy from A1/A2 sound

You can copy A1/A2 Seamless Loop into the Sampler

up to 15 sec.

!6 Copy from A1

• When the B button of the Sampler is pressed,

“SAMP

0 A1” and “Copy/Push Samp” are

displayed.

Then quickly push the SAMP button, the copying

is completed within seconds.

!7 Copy from A2

• When the STOP button is pressed, “SAMP

A2” and “Copy/Push Samp” are displayed.

Then quickly push the SAMP button, the copying

is completed within seconds.

NOTES:

•

You can not copy when the Sampler is already loaded.

•You can copy just your Hot Start A1/A2 points

(without a B point set) for up to 15 sec in the Cue

mode.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Comments to this Manuals

No comments

Denon DN-S3500 User Manual Page 17

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3500