Denon DN-S3700 Owner's Manual download pdf (Page 25)



Getting Started Connections Playback Speciﬁcations

Memo Function Utility

Flanger Parameter Setting



Press the FLANGER button.

When the FLANGER button is pressed, the FLANGER

button lights and the parameters setting screen is

displayed.

b When the ﬂanger indicator is solid (not blinking), press the

FLANGER button to set the ﬂanger parameter selection mode

again.



Q0 Turn both the

PARAMETERS

knob and the

EFFECTS knob

to set the flanger parameters.

The FLANGER button and PARAMETERS

button ﬂash while the parameters are

being set.

b The FLANGER Depth can be set with the

EFFECTS

knob, while the FLANGER Delay Time can be set with

the

PARAMETERS knob.



Q1 Press the

PARAMETERS

knob or the

PLATTER MODE

button to turn off the

parameters setting screen.



Q2 Press the

FLANGER

button while the

flanger parameters setting screen is

displayed.

Turning the ﬂanger off.





Q5 Press the

PARAMETERS

knob or the PLATTER

MODE

button to turn off the parameters setting

screen.





Q6 Press the

FILTER

button while the filter settings

screen is displayed.

Turning the ﬁlter off.

Platter Effects

Brake Operating Time Setting

This simulates a turntable gradually slowing and stopping

playback.



Press the BRAKE button.

When the BRAKE button is pressed, the brake mode

is turned on, and the BRAKE button and PARAMETERS button

ﬂash for about 3 seconds to indicate the brake operating time.



Q8 Turn the

PARAMETERS

knob to set the brake

operating time.

The operating time is set and the operating time

setting mode is canceled.

b If no operation is performed for about 3 seconds after

the ﬁrst time the

BRAKE button is pressed or the

adjustment is performed with the PARAMETERS

knob, selection of the brake operating time is canceled

automatically.

Operating the Brake



During playback, press the

1 3

button.



To cancel brake operation, press the

1 3

button

again during brake operation.

Brake operation is canceled.

n Turning the brake mode off

Q9 Press the

BRAKE

button while the brake is operating.

The brake mode turns off.

Basic Operations

Filter Parameter Setting



Press the FILTER button.

When the FILTER button is pressed, the FILTER button

lights and the parameters setting screen is displayed.

b When ﬁlter indicator is solid (not blinking), press the

FILTER button

to set the ﬁlter parameter selection mode again.



Q4 Use the

FILTER button

and the

EFFECTS knob

set the lter parameters.

The FILTER button and PARAMETERS

button ﬂash while the parameters are

being set.

b The Filter Band width can be set with the

EFFECTS

knob, while the Filter types can be set with the

PARAMETERS knob (high/mid/low).

W0 During playback, press the

DUMP

button.

Dump playback starts.

Dump Play

This function allows effect playback combining reverse

playback with normal forward playback.

n Dump effect

During playback, press the

DUMP

button.

b The mode switches between dump playback and

normal playback each time the

DUMP button is

pressed.

b Dump playback turns off if the hot start or stutter play operation is

performed.

n Turning dump playback off

W1 Press the

DUMP

button during dump playback.

Dump playback turns off.

NOTE

DUMP time effect continues until it’s turned off.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Denon DN-S3700 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3700