Denon DN-X1600 User Manual download pdf (Page 19)

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Fader Start

ENGLISH





Crossfader Start

Using the SOURCE SEL controls, select the source

from LINE1 CD, LINE2 CD, LINE3 CD and

LINE4 CD.

Set the CROSSFADER ASSIGN switches (A/

THRU/B) to A or B.

Turn on the CROSSFADER START switches.

Slide the Crossfader all the way in direction

opposite the source you want to start.

(In the following example, startup is done with the

CD player connected set to Assign A.)

Set the standby mode on CD player.

Use the CROSSFADER CONTOUR control to control

the cross fader startup curve.

When the Crossfader is slide in the opposite

direction, CD player play will begin.

FADER (setting the fader curve)

This adjusts the rise response of the channel fader/cross

fader.

Setting the channel fader curve

• When the channel fader CONTOUR control is turned to the

left, the curve will have characteristics that rise gradually.

• When turned to the right, it will have characteristics that

rise sharply.

• At the center position, curve characteristics between the

two will be produced.

• The same curve characteristics apply to channels 1 to 4.

Setting the crossfader curve

• When the crossfader CONTOUR control is turned to the

left, the curve will have characteristics that rise gradually.

• When turned to the right, it will have characteristics that

rise sharply, and cut-in and cut-out operations will be

performed.

• At the center position, curve characteristics between the

two will be produced.

How to adjust the Crossfader torque

Remove the rubber cap of the front panel.

Move the Crossfader to the far right until the screw

head becomes visible.

Insert a screwdriver, and adjust the sliding torque.

• When the screw is turned clockwise:

The sliding torque is increased so that the Crossfader

moves more stifﬂ y.

• When the screw is turned counterclockwise:

The sliding torque is decreased so that the Crossfader

moves more easily.

After completing the adjustments, replace the

rubber cap onto the front panel.

NOTE

• The Crossfader has a high-precision construction: As such, tightening

the screw with too much force or loosening it excessively may result

in damage or adversely affect performance.

Rubber cap

Screwdriver

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments

Denon DN-X1600 User Manual Page 19

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X1600