Denon DN-X1600 User Manual download pdf (Page 8)

Getting Started Connections Basic Operations Speciﬁ cations TroubleshootingEffector Function Fader Start UtilityUSBGetting Started

ENGLISH

MASTER LEVEL control

Adjusts the level of the MASTER outputs.

Master EFX INS button

This button enable the various effects to be

obtained for the master output signals.

BOOTH LEVEL control

Adjusts the level of the BOOTH outputs.

USB ASSIGN CH/MASTER indicator

This displays the assignment destination of

the USB Audio input signal supplied from the

computer.

Assignment destination settings for Ch and

Master are selected from the USB Assign items

in the preset controls in the utility mode.

CH:

•

Displayed when CH (1–4) are assigned.

MASTER:

•

Displayed when assigned to the master bus

and monitor bus.

MIDI CLK / V-LINK button

This enables the MIDI clock corresponding to

the BPM value to be sent from the USB MIDI

and MIDI output terminals to the computer

(software) or external device.

START:

Sending the MIDI clock is started.

STOP:

Sending the MIDI clock is stopped.

•

Press for more than one second to switch

V-LINK ON/OFF.

UTILITY/–USB A/USB B button

This allows the presets to be set and the system

information to be set, changed or referenced.

•

When it is held down for more than a second,

the USB mode switching screen is opened,

and the USB device mode or USB host mode

can be selected.

BEAT , buttons

(Short) :

The beat/time is decreased.

(Long) :

The beat/time is increased.

TAP/LOCK/AUTO/INPUT BPM button

TAP

When this button is tapped repeatedly, the BPM

is measured using the intervals between taps.

LOCK:

When the button is pressed once in the

auto BPM mode, the BPM value measured

automatically is locked.

AUTO BPM:

When the button is held down for one second,

the auto BPM mode is established, and the

measured BPM value is displayed.

INPUT BPM:

When it is held down for two or more seconds,

the BPM input mode is established, and the

BPM value can be input directly using the

u BEAT , buttons. When it is pressed

again, the mode is released.

Effect CUE button

When the CUE button is set to ON, the sound of

the effects can be monitored even if the effect

is OFF.

(Excluding ECHO, REVERB, and ECHO

REVERB.)

TIME/BACK button

TIME:

This button is used to select whether to change

the effects produced using the u BEAT ,

buttons on the basis of the number of beats

or time.

BACK:

This is used when returning to the previous

screen while setting screen operations are

being performed.

EFX SELECT control

This is for selecting the effect to be used.

Refer to the effect functions (page 12).

PARAMETER MIN/MAX control

This is used to adjust the ﬁ lter cutoff frequency

and other effector parameters. The parameters

are changed by the effector selected.

Parameter ON/OFF button

This is used to control the ON and OFF settings

of the effect parameters.

DRY/WET control

Use this to adjust the ratio of original and

effected sound.

Part Names and Functions

Top Panel

W0 Q9 R4

R2R1E7E6E5E4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Denon DN-X1600 User Manual Page 8

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X1600