Denon DN-X600 Owner's Manual download pdf (Page 18)

EFX SENDEFX INS BEATo,p

TAP

EFX ON/OFF

EFX INS

EFX SELECT

EFX CUE

EFX DRY/WET

EFX FREQ.

Operating the effector

Press EFX SEND for the channel that you want to

apply the effector to.

• The input source sound signal is sent to the effector.

• To apply the effector to the mic input or master output, press

EFX INS.

Set the BPM.

BPM is the base value for the effector. To obtain normal

effects, match the BPM value with the BPM of the track.

The following three setting methods are available for the BPM

value.

n Setting Auto BPM

q Press TAP for more than 1 second.

• ”Auto” is shown in the display.

• TAP LED lights up green.

Press TAP (short push).

• The measured auto BPM value is displayed, and that value

is locked.

• TAP LED switches off.

n Setting Manual In BPM

q Press TAP for more than 2 seconds.

• The BPM value in the display ﬂashes.

w Press BEAT to set the desired BPM value.

e Press TAP.

• The setting is complete.

n Setting Manual TAP BPM

q Repeatedly press TAP in time with the input source rhythm.

• The BPM value for the interval between button presses

is set.

Select the effector using EFX SELECT .

Press EFX ON/OFF to switch the effect ON.

• EFX ON/OFF lights up.

• Press EFX ON/OFF again to turn the effect off.

n Adjusting the effects

Rotate EFX FREQ.

• Adjust the ﬁlter cut off frequency, and adjust the frequency band

within which to apply the effect.

• This does not operate during SEND/RTN.

n To monitor the effect sound

Press EFX CUE.

Off

When this is switched on, the effect volume can be monitored even

when the effect is off. (Excluding ECHO and REVERB. )

n To adjust the proportion of

original volume and effect volume

Rotate EFX DRY WET.

• When rotated in the DRY direction, the original volume proportion

increases.

• When rotated in the WET direction, the effect volume proportion

increases.

Beat setting

Adjust the beats based on the set BPM value.

The setting range for beats differs depending on the effector.

Press BEAT to select the set beat value.

The beat display switches.

GSelectable rangeH

• When REVERB/FLANGER/B·BREAKER/FILTER/B·SCRATCH are

selected:

1/4 - 32

• When ECHO/DELAY/LOOP are selected:

1/16 - 4

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

Denon DN-X600 Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X600