Denon DN-X600 Owner's Manual download pdf (Page 24)

If a problem should arise, ﬁrst check the following:

1. Are the connections correct?

2. Is the set being operated as described in this owner's manual?

3. Is the external device (player or effects processor) operating correctly?

If this unit does not operate properly, check the items listed in the table below.

If the symptom is not covered on the check list, contact your dealer or service centers.

Service centers are listed at http://www.d-mpro.com.

• When contacting your dealer or service center, be sure to inform them of the software version number.

The software version number is shown on the display by pressing the

SPLIT CUE button and BEAT button

at the same time.

Symptom Cause/Solution Page

Power does not turn

on.

• Check whether the power plug is correctly inserted into the power

outlet.

The power switch

is ON, but the unit

power is off.

• The unit is in standby mode. Press the

RESTART button.

There is no sound, or

the sound is too quiet.

• Check the connections for all devices.

• Change the source selection switch to the device currently being

played.

• The mic ducking function is operating. Set the

DUCKING switch to

”OFF”.

6 – 8

The sound is distorted. • Adjust the master output adjustment knob.

• Adjust the input level adjustment knob.

Fader start cannot be

performed on the CD

player.

• Use the stereo mini terminal to connect the CD player to this unit.

• Set the fader start switch to ”ON”.

This unit does not

operate properly, or

there is no sound.

• Check the connections for all devices.

• Check whether the sound source, audio device, application, and OS

volume settings are correctly adjusted.

6 – 8

9, 14

This unit does not

operate properly, or

there is no sound.

• Select a suitable device.

• Match the unit settings with the application settings.

• WAV ﬁles become mixed if the sampling frequency and bit number

are different. Depending on the audio application used, WAV ﬁles that

have different sampling frequencies or bit numbers cannot be played

simultaneously.

• If another USB device is connected, connect only this unit and check

whether it operates correctly.

• Use the USB cable provided. Also, check whether the USB connector

of the connected computer is USB2.0 (Hi-Speed) compatible.

–

Troubleshooting

Symptom Cause/Solution Page

Sound cuts out or is

distorted.

• Exit any unneeded applications.

• When multiple WAV ﬁles are played back simultaneously, the playback

sound may cut out depending on the computer speciﬁcations. Try

playing back 1 WAV ﬁle.

–

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Denon DN-X600 Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X600