Denon Heos 7 Owner's Manual download pdf (Page 18)

Playing music from the AUX input

Connect an audio device with a 3.5 mm stereo audio

output to the AUX input on your speaker using the

included 3.5 mm stereo audio cable.

Select “AUX Input” from the Music tab.

Select the name of the speaker to which you connected

the audio device in step 1.

Initiate playback on the audio device.

The sound from the audio device can be played directly

on the selected speaker or digitized and sent over your

network to other speakers.

NOTE

The analog output signals from some sources can be fairly strong. If the input level of

the source device is turned up high, it could overload the inputs of the HEOS device.

This is unlikely to cause damage, but can cause distorted sound. Initially, set the

volume of the source to a medium – low level, then turn it up as needed. If you hear

distortion, turn down the device's volume control.

Audio signal

Contents

Setup Use Troubleshooting Status LED Appendix

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 66 67

No comments

Denon Heos 7 Owner's Manual Page 18