Denon Heos 7 Owner's Manual download pdf (Page 35)

Changing the Speaker’s Equalizer

Select “EQ”.

Adjust the Treble or Bass up or down.

Select the Reset button to restore the default settings.

Changing the Speaker’s Orientation

(HEOS 3 Only)

The HEOS 3 can be placed both vertically and horizontally.

Each orientation has it’s own sound tuning and should be set accordingly

for optimal sound quality.

Select “Orientation”.

Select “Vertical” if you placed your HEOS 3 vertically or

select “Horizontal” if you placed your HEOS 3

horizontally.

Select the Back button and your settings are

automatically saved.

Adjusting the Audio Quality

Selects the transcoding option for rebroadcasting audio from one HEOS

device to another HEOS device (or group of devices) across the network.

When set to “Normal”, high bit rate audio sources originating from the

firstdevice (such as AUX input, WAV, FLAC and PCM) will be transcoded

toensure the highest level of reliability for the audio stream.

Select “Quality”.

Select Normal (default) or High.

If you have selected High and you experience audio dropouts when streaming

sources from one device to other devices, please select Normal (default).

This setting does not affect the AUX input when played on the connected device

by itself (there are no other devices grouped to it), in which case the original

source quality and bit rate are maintained and there is no inherent delay.

Adjusting the Status Light Brightness

Select “Status Light”.

Adjust the brightness up or down or set the slider to

the OFF position to completely disable the status light.

Contents Setup Use Troubleshooting Status LED Appendix

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 66 67

No comments

Denon Heos 7 Owner's Manual Page 35