Denon DVM-1835 - DVD Changer Operations Instructions download pdf (Page 13)

English

–

Connection to an audio system

Stereo system

Optical cable (not supplied)

• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-

ter of 6 inches (15 cm) or more when storing them.

• Use a cable which is 9.8 feet (3 m) or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

NOTES

• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup

mode. (Refer to page 25)

• If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (Refer to page 25)

•

Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to OFF for audio output in the setup

mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 25)

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD

or DAT deck.

• Set Dolby Digital and DTS to OFF for audio output in the setup mode for method 1 only. Playing a DVD using incorrect set-

tings may generate noise distortion, and may also damage the speakers. (Refer to page 25)

• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a

decoder, etc., that is not DTS-compatible.

• When playing a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set

“LPCM SELECT” to “OFF” (Refer to page 25).

AUDIO

DVD

Audio Input Jacks

Digital Audio Input

Jacks

AUDIO OUT

(analog)

DIGITAL OUT

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + Dolby Digital decoder or DTS decoder

Dolby Digital decoder

DTS decoder

Method 1 Method 2

HOOK UPS

The following show examples of connections commonly used to connect the DVD player to TV and other components.

If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format,

the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.

By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience

with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters.

Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the

DVD player.

Audio cable

(supplied)

Optical cable

(commercially

available)

Audio Coaxial

Digital cable

(commercially

available)

E8625UD_EN.QX33 06.3.24 11:41 AM Page 13

Downloaded From Disc-Player.com Denon Manuals

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Denon DVM-1835 - DVD Changer Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for DVD players Denon DVM-1835 - DVD Changer