Denon AVR 4806 - AV Receiver Operations Instructions download pdf (Page 89)

Advanced Setup – Part 1

Setting the Digital In Assignment

• This setting assigns the digital input terminals of the AVR-

4806 for the different input sources.

Press the CURSOR

button to select

“Audio Input Setup” at the “System Setup

Menu”, then press the

ENTER button.

• Display the “Audio Input Setup” menu screen.

Press the CURSOR

button to select

“Digital In Assign”, then press the

ENTER

button.

• Display the “Digital In Assign” screen.

Press the CURSOR

button to select the

input source, then press the

CURSOR

button to select the digital input terminal.

Select from among COAX 1 to 3, OPT 1 to 5.

If the same digital input terminal is selected, the

setting for the input source that was previously

assigned switches to “OFF”.

The HDMI input terminal is displayed when it is

assigned to the input source at “HDMI/DVI In Assign”

( page 96, 97).

If an input source is assigned to a device connected

with an IEEE1394 cable at “IEEE1394 Assign”, the

digital input connector’s assignment setting switches

to “OFF”.

If “Yes” is selected for “Default”, the settings are

automatically reset to the default values.

Audio Input Setup

•Make the audio-related settings.

Press the ENTER button to enter the setting.

• The “Audio Input Setup” menu reappears.

• The OPTICAL 2, 3 and 4 terminals on the AVR-4806’s rear

panel are equipped with an optical digital output terminal for

recording digital audio signals to a CD recorder, MD recorder,

or other digital audio recording deck. Use this for digital

recording between a digital audio source (stereo – 2 channel)

and a digital audio recorder.

• “PHONO” and “TUNER” cannot be selected on the “Digital

In Assignment” screen.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 153 154

Comments to this Manuals

No comments

Denon AVR 4806 - AV Receiver Operations Instructions Page 89

Comments to this Manuals

Related products and manuals for Receiver Denon AVR 4806 - AV Receiver