Denon 1083 User Manual download pdf (Page 18)

Before setting up the system

Check that all the connections are correct, then turn on the main unit’s power.

Display the System Setup Menu.

Setting the type of speakers

• The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the

combination of speakers actually being used.

At the System Setup Menu select “Speaker Configuration”.

Switch to the speaker configuration screen.

Set whether or not speakers are

connected and, if so, their size

parameters.

• To select the speaker

• To select the parameter

Press the ENTER button to finalize the setting.

NOTE:

• Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency

(bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both

settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

Center Sp.

Front Sp.

Subwoofer

Surround Sp. A

Surround back Sp.

Surround Sp. B

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

No comments

Denon 1083 User Manual Page 18