Denon 1083 User Manual download pdf (Page 25)

NOTES:

• The OPTICAL 4 and 5 jacks on the AVR-3803/1083’s rear panel are equipped with an optical digital output jack for recording digital signals on

a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a

digital audio recorder.

• Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR-3803/1083’s rear panel to any jack other than

the OPTICAL 4 IN jack.

• Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVR-3803/1083’s rear panel to any jack other than

the OPTICAL 5 IN jack.

•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment.

Setting the Video Setup

• This setting assigns the color difference (component) video input jacks of the AVR-3803/1083 for the different input sources.

[1] Setting the Component In Assign.

At the System Setup Menu select “Video Setup” and

press the ENTER button.

The “Video Setup” screen appears.

Select “Component In Assign.” and press the ENTER

button.

Switch to the Component In Assign. screen.

Select the component (Y, P

B/CB and PR/CR) video input terminal to be assigned to the input source.

Select “NONE” for sources for which the component (Y, P

B/CB and PR/CR) video input is not to be used.

When the default, “Yes”, is selected, the settings are reset to the factory defaults.

Press the ENTER button to complete the setting.

At the “Video Setup” screen, select “Exit” and press the ENTER button.

The System Setup Menu reappears.

q Input source selection w Component video terminal selection

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

No comments

Denon 1083 User Manual Page 25