Denon DRA-F101 User Manual download pdf (Page 15)

ENGLISH

USING THE TIMER

(1)

Setting the Current Time (12-hour display)

Example: Setting the current time to 9:30 p.m.

Turn on the power.

Press the TIMER button for at least

3 seconds.

•“TIME” flashes on the display.

✽

If the time is already set,

“EVERYDAY” is displayed.

Press one of the TUNING buttons

to display “TIME”, then perform

step 3.

Press the MEMORY/SET button

at the sound of the chime of a

time service, etc.

•“30” stops flashing, remaining

lit, and the current time is

displayed.

✽

The number changes continuously when one of the

tuning buttons (TUNING UP or DOWN) is pressed.

✽

If the time is already set when step 2, 3 is performed,

both the hours and minutes positions flash.

MEMORY

/ SET

PHONES

SYSTEM

VOLUME

ON / STANDBY

AM-FM STEREO RECEIVER DRA-F101

SOURCE

DIRECT

BANDUPDOWN

TUNING

MEMORY

/ SET

FUNCTION

TIMERTONE DISPLAY

2 3,5,7 4,6

SYSTEM

ON / STANDBY

TIMER

Press the MEMORY/SET button.

•“9” stops flashing, remaining lit,

and the minutes position starts

flashing.

MEMORY

/ SET

Use the TUNING buttons to

input the minutes (30).

•“30” flashes in the

minutes position.

UPDOWN

TUNING

Press the MEMORY/SET button.

• The hours position flashes.

MEMORY

/ SET

Use the TUNING buttons

to input the hours (PM 9).

•“9” flashes in the hours

position.

UPDOWN

TUNING

(2) Before Setting the Timer

2 Be sure to set the current time. If the current time is not set, the timer standby indicator (“”) will not light and the

timer will not function.

2 Be sure to preset the station before setting the timer. (Refer to “Presetting AM and FM stations” on page 14.)

2 The DRA-F101 is equipped with two types of timers: the everyday time which turns the power on and off at the

same times every day, and the once timer that turns the power on and off only once.

2 Do not change the timer standby mode after the timer is activated (after the timer on time is reached). The timer may

not operate properly.

2 It is not possible to set the timer start and end times to the same time.

2 If the display or operation is not normal, unplug the power cord, then plug it back in while pressing the memory/set

button (MEMORY/SET). This restores the tuner to the initial default values. After doing this, reset the presettings,

current time and timer settings.

2 When setting the timer to operate the CD player do so with a disc loaded and the disc holder closed. The timer will

not operate properly if no disc is loaded or if the disc holder is open.

(3) Setting the Timer

2 The timer function lets you switch the power between

the on and standby modes automatically at the desired

times.

2 When connected in a system with the DCD-F101, the

timer can be used to play a CD.

Example: Using the everyday timer to listen to the

station stored at preset number 3 (FM 98.00 MHz)

from 2:35 p.m. to 2:56 p.m.

Turn on the power.

Press the TIMER button for at least

3 seconds.

•“EVERYDAY” is displayed.

TIMER

SYSTEM

ON / STANDBY

PHONES

SYSTEM

VOLUME

ON / STANDBY

AM-FM STEREO RECEIVER DRA-F101

SOURCE

DIRECT

BANDUPDOWN

TUNING

MEMORY

/ SET

FUNCTION

TIMERTONE DISPLAY

2 3, 5, 7, 9,11,13,15,17

1,18 4, 6, 8,10,12,14,16

✽

If the time is not set, “TIME” is displayed.

Perform steps 3 to 7 on page 15, then start

the timer setting over.

Press one of the TUNING

buttons to display

“EVERYDAY” or “ONCE”.

UPDOWN

TUNING

Press the MEMORY/SET button.

• This sets the unit to the timer

setting mode’s function

setting mode.

MEMORY

/ SET

Example: When the everyday timer is

selected

Use the TUNING buttons

to switch the function to

“TUNER”.

UPDOWN

TUNING

✽

The function switches as follows each time

the button is pressed:

: When the TUNING UP button is pressed.

: When the TUNING DOWN button is

pressed.

Press the MEMORY/SET button.

•“TUNER” is stored in the

memory as the timer function.

MEMORY

/ SET

Use the TUNING buttons

to set preset number 3.

UPDOWN

TUNING

Press the MEMORY/SET

button.

• The preset station is stored in

the memory and the timer on

time setting mode is set.

“E” and “oN” appear

alternately in the display in the

steps 8 to 11.

MEMORY

/ SET

<Setting the timer on

time>

Use the tuning buttons to set

the hours position to “PM

2”.

UPDOWN

TUNING

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

Comments to this Manuals

No comments

Denon DRA-F101 User Manual Page 15

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon DRA-F101