Denon DRA-F101 User Manual download pdf (Page 16)

ENGLISH

1 oN/E oN: Both once and everyday timers

are activated. (The mark

lights.)

1_ _/E oN: Only the everyday timer is

activated. (The mark lights.)

1 oN/E_ _: Only the once timer is activated.

(The mark lights.)

1_ _/E_ _: Both timers are canceled. (The

mark turns off.)

Press the MEMORY/SET button.

•“PM 2” is stored in the

memory for the hours position.

MEMORY

/ SET

Use the TUNING buttons to

set the minutes position to

“35”.

UPDOWN

TUNING

Press the MEMORY/SET button.

• The off time is stored in the

memory.

MEMORY

/ SET

Use the TUNING button to

select ”E oN”.

• The “” mark lights.

UPDOWN

TUNING

Press the MEMORY/SET button.

• The on time is stored in the

memory and the timer off time

setting mode is set.

“E” and “oFF” appear alternately

in the display in the steps 12 to 15.

MEMORY

/ SET

<Setting the timer off

time>

Use the TUNING buttons to

set the hours position to

“PM 2”.

UPDOWN

TUNING

Press the MEMORY/SET button.

•“PM 2” is stored in the memory

for the hours position.

MEMORY

/ SET

Use the TUNING buttons to

set the minutes position to

“56”.

UPDOWN

TUNING

✽

Turning on and off the timer standby ON/OFF

• In TIMER STANDBY mode, each time the TUNING

button is pressed, the setting changes as follows:

Turn off the power.

When the DRA-F101 is

connected in a system with

the D-F101 series, press the

power button on the receiver.

• The standby mode is set.

(The power switch indicator

turn orange and display turn

off.)

SYSTEM

ON / STANDBY

• When you set only the everyday timer, the

indication changes between 1_ _/E_ _ and 1_ _/E

oN.

• When you set only the once timer, the indication

changes between 1_ _/E_ _ and 1 oN/E_ _.

• When you complete the setting, the display

automatically returns to the former state after 5

seconds.

• To change the settings of TIMER STANDBY, press

TIMER button to set the unit in TIMER STANDBY

mode first, the use TUNING button to make

changes.

✽

When the timer start time is reached, the timer

operates.

✽

If “ONCE” is selected in step 3, the once timer

setting mode is selected. Set the timer using the

same procedure. At steps 4 and 8 through 15, “1”

(for once) is displayed instead of “E”.

The once timer is activated when “1 oN” is

displayed at step 17.

NOTES:

• The timer standby indicator (“”) will not light if

the current time is not set. If this happens, set the

current time. (Refer to “Setting the Current Time”

on page 15.)

• When the timer on time is reached while in the

standby mode, operation switches to the operation

set with the timer. (The timer setting has priority.)

• Set the standby mode when using the timer. The

timer may not operate properly if the power is on.

(4) Using the timer

The time and timer functions are incorporated in this unit.

2 Types of timer operations

EVERYDAY TIMER : Use this to turn the power on and standby at the same times every day.

ONCE TIMER : Use this to turn the power on and standby once.

SLEEP TIMER : Use this to set the power to turn standby after 10 to 60 minutes, in steps of 10 minutes (operated

from the remote control unit).

2 Notes on timer settings

• Be sure to set the current time beforehand.

• To listen to a radio program using the timer, be sure to preset the station beforehand. (Refer to “Presetting AM and

FM Stations” on Page 14.)

Timer Settings

Power Failures

Checking the Settings

If the power cord is unplugged or there is a power failure, the settings of the current time and once timer are erased and

the time display will flash. If this happens, reset the current time and the once timer.

Also check the timer and tuner presettings, and reset them if they have been cleared.

To check the timer settings, press the TIMER button for at least 3 seconds to select EVERYDAY or ONCE TIMER.

Next, press the TUNING button to select EVERYDAY or ONCE TIMER, then press MEMORY/SET button repeatedly to

display in order: Timer Start mode, and (when in TUNER mode) the reception band and preset channel number, Timer

On time, Timer Off time, Press the MEMORY/SET button again to return to the current mode display.

Changing the Settings

Repeat the timer setting operation to erase the previous settings and set the new settings.

Note on Setting the Timer

If the time set with the timer is reached while the system power is on, the operation switches to the operation set by

the timer.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Comments to this Manuals

No comments

Denon DRA-F101 User Manual Page 16

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon DRA-F101