Denon S-101 User Manual download pdf (Page 19)

q Insert the included hexagonal wrench into the hole

at the side of the connector’s “+” side. (Arrow A)

w Turn the hexagonal wrench in the direction of

arrow B to loosen the cable.

e Pull out the old cable. Be careful not to leave any

broken wire parts inside the connector. (Arrow C)

r Peel off the cable’s sheath and insert the new

cable with the copper colored core wire twisted

tightly together into the connector. (Arrow D)

t Turn the hexagonal wrench in the direction of

Arrow E and tighten securely so that the cable cannot be pulled out. Be sure to connect both

sides of the cable to the connectors with the proper polarities.

If the polarities are inverted, the phase may be off and the bass sound may be missing, resulting

in an unnatural sound.

ENGLISH

Connecting Other Sources Connecting Other Sources

COMPONENT VIDEO IN

PB/CB

PR/CR

Monitor TV

• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” in “HELP” to comply with your TV’s video

format. When the TV is NTSC formatted set to NTSC.

• When the PROGRESSIVE/INTERLACED switch on the ADV-S101’s rear panel is set to

“PROGRESSIVE”, no video signals are output from the VIDEO OUT or S-VIDEO OUT terminals.

Set the PROGRESSIVE/INTERLACED switch on the ADV-S101’s rear panel to “INTERLACED”, if you

want to use the VIDEO OUT or S-VIDEO OUT signals. ( page 11, 15).

Connecting a component connections

(Better than S-Video picture quality)

• For the component output only, it is possible to switch between interlace image output and

progressive image output. It is not possible to specify progressive image output for the Video

output connectors or S-Video output connector.

PROGRESSIVE:

Select this when using the ADV-S101 connected to a progressive type TV.

INTERLACED:

Select this when using the ADV-S101 connected to an interlace type TV.

2 To switch from interlace to progressive

•Turn off the power before changing the switch.

• Choose settings according to the TV to be connected.

• Set the PROGRESSIVE/INTERLACED switch on the ADV-S101’s rear panel to

select the type of the TV.

To change the speaker cable

Connecting the antenna terminals

• An F-type FM antenna cable plug can be connected directly.

• If the FM antenna cable’s plug is not of the F-type, connect using the F-type antenna adapter

(Option).

Direction of

broadcasting station

75 Ω/ohms

COAXIAL cable

FM antenna

AM loop antenna

(Supplied)

AM outdoor

antenna

Ground

FM antenna

adapter

(Option)

Refer to the procedure below if you want to switch to a different speaker cable. This example

describes how to mount the “+” side cable to the connector. Mount the “–“ side cable in the same

way.

NOTE:

• Do not connect two FM antennas

simultaneously.

• Even if an external AM antenna is used, do

not disconnect the AM loop antenna.

• Make sure AM loop antenna lead terminals

do not touch metal parts of the panel.

PROGRESSIVE/INTERLACED

Black

White

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 137 138

Comments to this Manuals

No comments

Denon S-101 User Manual Page 19

Comments to this Manuals

Related products and manuals for Acoustics Denon S-101