Denon Speaker SC-CX101 User Manual download pdf (Page 5)



ENGLISH

Getting Started Connections Removing the Speaker Net About the Ventilation Holes

Speciﬁcations

CAUTION

• Be sure to turn the ampliﬁer’s power off before connecting the

speakers to the ampliﬁer.

• If the polarities are inverted, the phase may be off and the sound

may have no bass component, making it seem unnatural. Be sure to

connect the polarities properly.

Other Cautions

Note that the illustrations in this instructions may differ from the actual

set for explanation purposes.

The surface of the set’s cabinet uses parts made from natural wood.

The colors and patterns are thus natural and unique to each set. Note

that the surface is coated and ﬁnished based on DENON’s strict quality

standards so the set can be used without worry.

External Finish

Moving the Unit

• Do not shock this unit.

• Always check that the speaker cables disconnected before moving

this unit.

Cleaning

• Use a wiping cloth and wipe lightly to remove dirt from the cabinet

and operation panel.

• When using chemically treated cloths, follow the precautions that

have been written for them.

• Do not use benzene, thinners, or other organic solvents or insecticides

on the main unit since they may cause a change in quality or color.

•

There are various types of speaker output terminals on ampliﬁers.

Check your ampliﬁer’s owner’s manual.

• Raising the ampliﬁer’s volume excessively and playing with distorted

sound could damage the ampliﬁer and speakers. Enjoy the sound at

a reasonable volume level.

• When moving the unit, note that applying strong force to the surface

of the speaker through the saran net could damage the speaker.

Connections

When connecting, be sure to read the ampliﬁer’s owner’s manual

carefully and connect properly.

• Connect the input terminals on the rear panel of the speaker with the

speaker output terminals on the ampliﬁer, using the speaker cables

(Supplied).

• Connect the speaker for the left channel to the “L” terminal on the

ampliﬁer, the speaker for the right channel to the “R” terminal on the

ampliﬁer, making sure to check the polarities (“+” and “–”).

Once connections are completed, check that all of the short-circuiting

cords are securely connected to the terminals (“+” to “+”, “–” to “–”

on the woofer and tweeter sides).

Normal Connections

“+” side terminal: Red

“–” side

terminal: Black

Short-circuit cord

Connect to

ampliﬁer’s “+” side.

Connect to

ampliﬁer’s “–”

side. (Plain core)

• Once connections are completed, pull gently on the speaker cables

to check that they are securely connected.

• The speaker cables can also be connected to the terminals using the

included banana plugs.

CAUTION

Do not let the core wires of two speaker cables touch each other.

Doing so will short-circuit the ampliﬁer circuitry and damage the

ampliﬁer.

ENGLISH

Getting Started Connections

 Twist rmly the wires by hand so

that they do not stick out and cause

short-circuits.

 Loosen the terminal, insert the

cord’s core wire into the hole in the

terminal, then turn the terminal

clockwise to tighten it.

Even if nothing is connected to a terminal, turn it

clockwise to tighten the short-circuit cord.

Sheath

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Denon Speaker SC-CX101 User Manual Page 5

Comments to this Manuals

Related products and manuals for Acoustics Denon Speaker SC-CX101