Denon AVR 1906 - AV Receiver Operations Instructions download pdf (Page 26)

ENGLISH

Basic Operation Basic Operation

SELECTFUNCTION

SURROUND PARAMETER

SURROUND MODE

STANDARD/

NIGHT

STATUSINPUT MODE

ENTER

STANDARD

INPUT MODE

ON SCREEN

CURSOR

SURROUND

BACK

SURROUND

PARAMETER

FUNCTION

Dolby Digital mode and DTS surround

(only with digital input)

Select an input source set to digital (COAXIAL/

OPTICAL) ( page 40).

Example: DVD

(Main unit) (Remote control unit)

Press the INPUT MODE button to set the input

mode to “AUTO” or “DTS”.

Press the STANDARD button to select the

STANDARD (Dolby/DTS Surround) mode.

When performing this operation from the main unit’s panel,

press the SURROUND MODE button, then turn the SELECT

knob and select Dolby Pro Logic IIx or DTS NEO:6.

Play a program source with the or

symbol.

• The Dolby Digital indicator lights

when playing Dolby Digital

sources.

• The DTS indicator lights when

playing DTS sources.

Operate the SURROUND BACK button

to switch Surround Back CH ON/OFF.

• The SURROUND BACK indicator

lights when the SURROUND BACK

button is on.

Lights

Press the SURROUND PARAMETER button.

• The surround parameter menu is displayed.

Press the SURROUND PARAMETER button, and

press the CURSOR

button to select the

various parameters.

Turn the SELECT knob, and press the CURSOR

button to adjust the parameter settings.

Press the ENTER button to finish the surround

parameter mode.

• When making parameter settings, the display will return to the

regular condition several seconds after the last button was

pressed and the setting will be completed.

2 Surround parameters e

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the level of the

extreme high frequencies, compensating for overly-bright

sounding motion picture soundtracks. Select this function if the

sound from the front speakers is too bright.

This function only works in the Dolby Pro Logic IIx, Dolby

Digital, DTS Surround and DTS NEO:6 modes. (The same

contents are set for all operating modes.)

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range

(the contrast between very soft and very loud sounds). For

listening late at night, or whenever the maximum sound level is

lower than usual, the Dynamic Range Compression allows you

to hear all of the sounds in the soundtrack (but with reduced

dynamic range). (This only works when playing program

sources recorded in Dolby Digital or DTS). Select one of the

four parameters (“OFF”, “LOW”, “MID” (middle) or “HI”

(high)). Set to OFF for normal listening.

LFE (Low Frequency Effect):

This sets the level of the LFE (Low Frequency Effect) sounds

included in the source when playing program sources recorded

in Dolby Digital or DTS.

If the sound produced from the subwoofer sounds distorted

due to the LFE signals when playing Dolby Digital or DTS

sources when the peak limiter is turned off with the subwoofer

peak limit level setting (system setup menu), adjust the level as

necessary.

Program source and adjustment range:

1. Dolby Digital: –10 dB to 0 dB

2. DTS Surround: –10 dB to 0 dB

When DTS encoded movie software is played, it is

recommended that the LFE LEVEL be set to 0 dB for

correct DTS playback.

When DTS encoded music software is played, it is

recommended that the LFE LEVEL be set to –10 dB for

correct DTS playback.

TONE:

This enables the tone control. This can be set individually for

the separate surround modes other than DIRECT mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 69 70

Comments to this Manuals

No comments

Denon AVR 1906 - AV Receiver Operations Instructions Page 26

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 1906 - AV Receiver