Denon AVR3310CI - Multi-Zone Home Theater Receiver Owner's Manual download pdf (Page 10)



Connections Playback Information SpeciﬁcationsGetting Started Unavailable Functions After Upgrading

ENGLISH

Setting items Setting contents

Speaker Conﬁguration

(Continued)

Surround Back : Set the presence, size and number of surround back

speakers.

Large : Use of a large speaker that can adequately playback low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when the surround back speakers are not connected.

2spkrs : Use two surround back speakers.

1spkr : Use only one surround back speaker. When you select this

setting, connect the surround back speaker to the left (L) channel.

When the “Amp Assign” setting (vpage 8) is other than “Normal”,

you cannot make the “Surround Back” setting.

Even when the Surround Back Speaker setting is other than “None”,

sound may not be emitted from the surround back speaker, depending

on the playback source. In this case, “Surround Parameters” – “Surround

Back” setting other than “OFF” (vpage 12).

•

Front Height : Set the presence and size of the front height speakers.

Large : Use of a large speaker that can adequately playback low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when the front height speakers are not connected.

When the “Amp Assign” setting (vpage 8) is other than “Front

Height”, you cannot make the “Front Height” setting.

•

Front Wide : Set the presence and size of the front wide speakers.

Large : Use of a large speaker that can adequately playback low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity for

low frequencies.

None : Select when the front wide speakers are not connected.

When the “Amp Assign” setting (vpage 8) is other than “Front

Wide”, you cannot make the “Front Wide” setting.

•

Setting items Setting contents

Bass Setting

Settings for subwoofer and

LFE signal range playback.

Subwoofer Mode : Select low range signals to be reproduced by

subwoofer.

LFE : The low range signal of the channel set to “Small” speaker size is

added to the LFE signal output from the subwoofer.

LFE+Main : The low range signal of all channels is added to the LFE

signal output from the subwoofer.

This can be set when “Speaker Conﬁguration” – “Subwoofer” (vpage

8) is set to “Yes”.

Play music or a movie source and select the mode offering the strongest

bass.

Select “LFE+Main” if you want the bass signals to always be produced

from the subwoofer.

•

LPF for LFE : Set LFE signal playback range.

80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz•

Distance

Set distance from listening

position to speakers.

Measure beforehand the

distance from the listening

position to each speaker.

Unit : Set the unit of distance.

Feet

Meters

•

Step : Set the minimum variable width of the distance.

1ft / 0.1ft

0.1m / 0.01m

•

Front L / Front R / Center / Subwoofer / Surround L / Surround R /

S. Back L

/ S. Back R

/ Front Height L / Front Height R / Front Wide

L / Front Wide R : Select the speaker.

z: When the “Speaker Conﬁguration” – “Surround Back” setting

(vpage 9) is set to “1spkr”, “S. Back” is displayed.

0.0ft ~ 60.0ft / 0.00m ~ 18.00m : Set the distance.

Speakers set to “None” in “Speaker Conﬁguration” (vpage 8) are not

displayed.

The speakers that can be selected differ depending on the “Amp Assign”

(vpage 8) and “Speaker Conﬁguration” (vpage 8) settings.

Default settings :

Front / Center / Subwoofer / Front Height / Front Wide : 12.0 ft (3.60 m)

Surround / Surround Back : 10.0 ft (3.00 m)

Set the difference in the distance between the speakers to less than 20

feet (6.0 meters).

•

Default : Reset all distance settings to factory default.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Default Setting?”

prompt is displayed. Select either “Yes” or “No”, and press ENTER.

•

Making Detailed Settings (Manual Setup)

Settings

Main remote control

operation buttons

:Displaying the menu

Cancel the menu

:Moves the cursor

(Up/Down/Left/Right)

:Conﬁrm the setting :Return to previous menu

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Comments to this Manuals

No comments

Denon AVR3310CI - Multi-Zone Home Theater Receiver Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR3310CI - Multi-Zone Home Theater Receiver