Denon AVR3310CI - Multi-Zone Home Theater Receiver Owner's Manual download pdf (Page 21)

0

ENGLISH

Connections Settings

Playback Information

Getting Started

Unavailable Functions After Upgrading

Speciﬁcations

Video section

• Standard video connectors

Input / output level and impedance: 1 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)

• S-Video connectors

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

C (color) signal — 0.286 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)

• Color component video connector

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

PB / CB signal — 0.7 Vp-p, 75 Ω/ohms

PR / CR signal — 0.7 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to “OFF”)

HD Radio section [FM] [AM]

(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10

-15

Receiving Range: 87.5 MHz ~ 107.9 MHz 530 kHz ~ 1710 kHz

Usable Sensitivity: 1.5 µV (14.8 dBf) 20 µV

S/N (IHF-A): MONO 78 dB

STEREO 68 dB

HD 85 dB 85 dB

Total harmonic Distortion (at 1 kHz): MONO 0.1 %

STEREO 0.2 %

HD 0.02 % 0.02 %

General

Power supply: AC 120 V, 60 Hz

Power consumption: 7.0 A

0.1 W (Standby)

Maximum external dimensions: 434 (W) x 171 (H) x 414 (D) mm (17-3/32” x 6-47/64” x 16-19/64”)

Weight: 12.9 kg (28 lbs 7 oz)

Main remote control unit (RC-1118)

Batteries: R6/AA Type (two batteries)

Maximum external dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)

Weight: 184 g (Approx 6.5 oz) (including batteries))

Sub remote control unit (RC-1121)

Batteries: R03/AAA Type (two batteries)

Maximum external dimensions: 49 (W) x 220 (H) x 24.5 (D) mm (1-59/64” x 8-21/32” x 31/32”)

Weight: 114 g (Approx 4 oz) (including batteries)

b For purposes of improvement, speciﬁcations and design are subject to change without notice.

Audio section

• Power ampliﬁer

Rated output:

Front:

120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)

160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Center:

120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)

160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround:

120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)

160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround back:

120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)

160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Front height / Front wide:

120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)

160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Dynamic power: 130 W x 2ch (8 Ω/ohms)

180 W x 2ch (4 Ω/ohms)

Output connectors: Center, Surround, Surround back

6 ~ 16 Ω/ohms

Front: A or B

6 ~ 16 Ω/ohms

A + B

8 ~ 16 Ω/ohms

• Analog

Input sensitivity / Input impedance: 200 mV / 12 kΩ/kohms (except for EXT. IN (SW, S, SB), CD, PHONO, V. AUX)

200 mV / 47 kΩ/kohms (EXT. IN (SW, S, SB), CD, PHONO, V. AUX)

Frequency response: 10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode)

S/N: 102 dB (IHF–A weighted, DIRECT mode)

Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)

Rated output: 1.2 V

• Digital

D/A output: Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)

S/N ratio — 102 dB

Dynamic range — 100 dB

Digital input: Format — Digital audio interface

• Phono equalizer (PHONO input — REC OUT)

Input sensitivity: 2.5 mV

RIAA deviation: ±1 dB (20 Hz to 20 kHz)

S/N: 74 dB (A weighting, with 5 mV input)

Rated output: 150 mV

Distortion factor: 0.03 % (1 kHz, 3 V)

Speciﬁcations

1 2 ... 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Denon AVR3310CI - Multi-Zone Home Theater Receiver Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR3310CI - Multi-Zone Home Theater Receiver