Denon DBP-2012UD Owner's Manual download pdf (Page 45)

ENGLISH

Basic versionSimple version InformationAdvanced version

Audio Setting

Settings for audio output are made.

Audio Output

Default settings are underlined.

Set the audio output.

Setting items Setting details

Coaxial

For selecting the format

output from the digital audio

output terminals.

Bitstream : For selecting if the device connected to the unit supports

Dolby Digital or DTS Digital Surround.

PCM : For selecting when the device connected to the unit does not

support Dolby Digital or DTS Digital Surround.

Off : For outputting no audio signal from the digital audio output terminal

of the unit.

For converting audio signals, see “About digital signal audio output”

(vpage52).

HDMI

For selecting the format

output from the HDMI

output terminals.

Bitstream : For selecting when the device connected to the unit supports

Dolby TrueHD/Dolby Digital Plus/Dolby Digital or DTS-HD/DTS Digital

Surround. The output format is automatically selected according to the

audio format or the number of channels supported by the connected

HDMI device.

PCM : For selecting when a device connected to the unit does not support

Dolby TrueHD/Dolby Digital Plus/Dolby Digital or DTS-HD/DTS Digital

Surround.

Off : For outputting no audio signal from the HDMI output terminal of the

unit.

For converting audio signals, see “About digital signal audio output”

(vpage52).

NOTE

• If “BD Audio Mode” is set to “HD Audio

Output” with MODE on the remote control, BD

secondary audio and interactive audio are not

output.

• For playback of a super audio CD with DSD via

the analog audio output terminals, set “HDMI”

to “Off”.

Remote control operation

buttons

Displaying the menu

Cancel the menu

Move the cursor

(Up/Down/Left/Right)

Decision the setting Return to previous menu

Setting items Setting details

Down Sampling

For selecting the sampling

rate output from the digital

audio output terminal.

Refer to the operation manual for the device connected to the unit, and

make settings depending on the connected device.

48 kHz / 96 kHz / 192 kHz

NOTE

• For rights-protected content, the audio signal is down-sampled to 48 kHz,

16-bits, and output.

• If the connected device does not support the sampling rate of 96 kHz or

192 kHz and the settings for the unit is made as 96 kHz or 192 kHz, much

noise may be generated from the connected device.

• When you want to view content that has a sampling frequency of 48 kHz

or higher with 2 ch Audio Out, set “Audio Output” – “Down Sampling”

in the GUI menu to “192 kHz”.

DRC

Compresses the dynamic

range of Dolby TrueHD/

Dolby Digital Plus/Dolby

Digital Audio.

Off : Dynamic range is not compressed.

On : Dynamic range is compressed.

Auto : Dynamic range of Dolby TrueHD audio is automatically compressed

according to the material. Audio of Dolby TrueHD only is compressed.

This setting compensates high volume to low and low volume to high

when high volume is not desired at night.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 73 74

Comments to this Manuals

No comments

Denon DBP-2012UD Owner's Manual Page 45

Comments to this Manuals

Related products and manuals for Blu-Ray players Denon DBP-2012UD