Denon DRW-695 Operations Instructions download pdf (Page 11)

ENGLISH

TAPE COUNTER AND MEMORY STOP

1) Operation of the Tape Counter

(1) Press the RESET button to reset the counter to “ ‚‚‚‚ ”.

(2) By using the PLAY, FF, or REW functions, the reading of the counter will

change to indicate index position.

• During recording and playback operations, the counter is useful for

noting the location of existing programs or positions where recording is

to be started.

• The reading of this counter does not correspond with that of any other

deck.

(3) Deck A and Deck B have the memory of their own counter.

2) MEMORY STOP Operation

(1) During recording or playback, the Memory Stop feature can be used to

locate a particular point on the tape. Press the COUNTER RESET button

at the desired point.

(2) Then Press the COUNTER MEMORY button, the MEMO indicator

lights.

(3) When the Fast Rewind (

6 ) button is pressed during forward tape

travel ( ), or the Fast Forward (

7 ) button is pressed during

reverse tape travel ( ), the tape is rapidly rewound (or advanced)

until the counter indication of “ ‚‚‚‚ ” is reached.

• The Memory Stop feature will rewind or forward the tape to within –5

counts in the forward ( ) direction (from “ ‚‚‚‚ ” to “ ”)

and to within +5 counts in the reverse ( ) direction (from “ ‚‚‚‚ ”

to “ ‚‚‚ﬁ”). After this, several seconds are required for corrective

operations.

• The Memory Stop function operates independently in both directions

for deck A and deck B.

Caution:

If the memory stop operation is performed after repeated fast-forwarding or

rewinding, the tape may not stop at the proper position.

PLAY PLAY

COUNTER

RESET

MEMORY

REC PAUSE

DIRECTION

REC

REC MUTE

CD SYNCHRO

COUNTER

RESET

MEMORY

MEMO

MPX

HIGH

DUB

SYNC

MEMO

-40 -30 -20 -10 -5 -3 -1 0 +1 +3 +5 +10

TIMER RECORDING/PLAYBACK

Timer recording/playback can be made using any audio timer available on the market.

LINE

OUT

LINE

SYNCHRO

TAPE-1

REC

LINE

OUT IN

TUNER

OUT PUT

DRW-695

Amplifier

Tuner

Wall outlet

Timer

On timer recording/playback

Lch Rch

Speaker System

• Timer recording procedure

1. Make sure the connections are correct, especially the power supply

connections.

2. Turn “on” the power switch of each appliance.

3. Tune the desired station on the tuner.

4. Load the tape for recording. (Make sure the erase prevention tab is not

broken off; if it is, cover the hole with plastic tape).

5. Set the Dolby NR switch to the appropriate position.

6. Select the type of tape transport with the REVERSE MODE switch

7. Make sure the monitor switch to the SOURCE position.

8. Adjust the recording input level.

9. Set the starting position of the tape.

10. Set the timer switch (TIMER) to the “REC” side.

2. Turn “on” the power switch of each appliance.

3. Load the pre-recorded tape to be played back.

4. Set the Dolby NR switches to the appropriate positions.

5. Select the type of tape transport with the REVERSE MODE switch

6. Set the monitor switch of the Amplifier to the TAPE position.

7. Press the PLAY (

1 ) button and playback the tape; adjust the playback

level.

Press the stop (

2 ) button.

8. Set the timer switch (TIMER) to the “PLAY” side.

TIMER

REC OFF PLAY

11. Set the audio timer to the desired time. The audio timer will turn the power

supply on at the desired time.

* With the above procedures, timer controlled recording can be made.

When the preset time comes, the power is supplied and the FM

broadcast can be recorded.

• Timer playback procedure

1. Make sure the connections are correct, especially the power supply

connections.

9. Set the audio timer to the desired time. The audio timer will turn the power

supply on at the desired time.

* With the above procedures, timer playback can be accomplished.

When the preset time comes, the power is supplied and playback will

start.

Notes:

• Please read the operating instructions for the timer before use.

• If the timer recording or playback is not desired, be sure to switch the timer

switch (TIMER) to “OFF”.

• When using timers that allow several “on/off” operations, timer start

functioning can continue an unlimited number of times until the tape in the

machine is finished.

TIMER

REC OFF PLAY

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 68 69

Comments to this Manuals

No comments

Denon DRW-695 Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for Cassette players Denon DRW-695