Denon DSB-200 Owner's Manual download pdf (Page 24)

No sound from the speaker

Symptom Cause / Solution Page

No sound from the speaker

The speaker is not connected to AC power or the battery is not charged. Connect power and turn on the

speaker.

The volume is too low or muted. Turn up the volume on your device to about 90 % and then turn up the

volume on the speaker.

There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again.

There is no connected AUX device. Connect an audio device to the AUX input using a stereo 3.5mm

cable and make sure music playing music on your device.

The AUX input connector of Envaya is compatible with stereo mini plug cables that have 3-conductor

plugs. Be sure to use a 3-conductor stereo mini plug cable.

If Envaya is in mute mode, cancel mute mode by pressing the mute button again or increase the volume.

Sound is distorted, noisy, or cuts in and out

Symptom Cause / Solution Page

Sound is distorted, noisy, or

cuts in and out

The volume is too low on your connected device. Turn up the volume on your device to about 90 % and

then adjust the volume on the speaker.

The Bluetooth device is out of range. Bring the Bluetooth device closer to the speaker. －

The Bluetooth connection is experiencing wireless interference. Move the speaker away from appliances

such as microwave ovens and other wireless devices.

－

The Bluetooth device is having connectivity issues. Cycle the power on the Bluetooth and reconnect to

the speaker.

－

Contents Preparation Connections

Volume adjustment

Troubleshooting

Appendix

Index

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

No comments

Denon DSB-200 Owner's Manual Page 24