Denon DVD-1920 User Manual download pdf (Page 16)

–

Getting started

• Turn on the power of the TV, amplifier and any other com-

ponents which are connected to the DVD player.

• Make sure the TV and audio receiver (commercially avail-

able) are set to the correct channel.

Press the POWER ON button.

•“P-ON” will appear briefly on the display panel.

Press the OPEN/CLOSE button

to open disc loading tray.

Place the disc in the tray, with the

label facing up.

Press the PLAY button.

• The tray will close automatically,

then playback will start from the first

chapter or track of the disc. If the playback does not

start automatically, press the PLAY button.

• When you play back the DVD with a title menu, it may

appear on the screen. In this case, refer to “Title menu”.

Press the STOP button to stop playback.

NOTES:

• A “prohibited icon” may appear at the

top-right corner on the TV screen during

operation, warning that a prohibited

operation has been encountered by the

DVD player or the disc.

• With DVDs that use some titles for playback program

signals, playback may start from the second title, or it

may skip these titles.

• During the playback of two layered disc, pictures may

stop for a moment. This happens when the 1st layer

switches to the 2nd layer. This is not a malfunction.

• The operation may vary when you play back DVDs with

disc menu. Refer to the manual accompanying the disc

for details.

WMAJPEG

MP3

Super

Audio CD

CDDVD-ADVD-V

Press the MENU button.

• The DVD main menu will appear.

If the feature is not available, symbol may

appear on the TV screen.

If disc menu is available on the disc, audio lan-

guage, subtitle options, chapters for the title and

other options will appear for selection.

Press the Cursor buttons (K / L / s / B) to select an

item, and the ENTER button to confirm the selection.

DVD-V

DISC PLAYBACK

Basic Playback

Disc Menus

DVD may contain menus to navigate the disc and access spe-

cial features. Press the appropriate Numeric buttons or use the

Cursor buttons (K / L / s / B) to highlight your selection in the

DVD main menu and press the ENTER button to confirm.

NOTE:

•

Unless otherwise stated, all operations described in this

manual are based on remote control use. Some operations

can be carried out using the menu bar on the TV screen.

DVD-ADVD-V

General Features

Press the TOP MENU button.

• The title menu will appear.

If the feature is not available, symbol may

appear on the TV screen.

Press the Cursor buttons (K / L / s / B) to select an

item, and the ENTER button to confirm the selection.

• Playback will begin at the selected title.

DVD-ADVD-V

Title Menu

HDMI Setup

Press the HDMI button on the front panel to select

the HDMI output mode.

The output mode changes as follows every time

the HDMI button is pressed.

• The HDMI indicator on the front panel lights up when

HDMI output mode is on.

OFF (Default):

No video outp

ut from the HDMI OUT connector.

480P: Video output from the HDMI OUT jack at 480p.

720P: Video output from the HDMI OUT jack at 720p.

1080: Video output from the HDMI OUT jack at 1080i.

NOTES:

• Video and audio signals may distorted temporarily

when switching to/from the HDMI output mode.

•

Use a display equipment with an HDMI-compatible port.

•

Progressive video signal will not be output from the COM-

PONENT VIDEO OUT during the HDMI output mode.

•

The HDMI indicator on the front panel flashes when you

select the HDMI output mode but there is no HDMI cable.

• If you turn on the pure direct mode, both video and

audio signals thru the HDMI output will be cut off (press

the PURE DIRECT button again to recover).

• You can check the HDMI connection status by pressing

the DISPLAY button during playback with the HDMI

output mode (refer to page 22).

• If the TV is not compatible with newly selected HDMI

output mode, the actual output mode will be kept the

one before changing the selection. When this occurs,

the newly selected mode will appear on the front panel

display (see page 10) while the actual output resolution

will be indicated by performing the on-screen display as

described on page 22.

720P 1080OFF

480P

Pure Direct Mode

Press the PURE DIRECT button on the front panel

to output an analog audio signal only (no analog

video and HDMI signals will be output and the dis-

play will be turned off). The higher quality sound

will be achieved.

NOTES:

• When pressed the buttons below, the pure direct mode

will be released.

OPEN/CLOSE button (on both the remote and the front

panel), SETUP or DISPLAY button (on the remote),

ON/STANDBY or PURE DIRECT button (on the front

panel).

• The PURE DIRECT button will not function while dis-

playing the setup menu.

• If you turn on the pure direct mode while selecting HDMI

mode, both video and audio signals will not be output.

Press the DIMMER button on the front panel to

select the desired brightness of the front panel dis-

play. (BRIGHT, DIMMER or OFF)

• The default setting is BRIGHT.

NOTES:

• The brightness of the front panel display can be adjust-

ed from the setup menu. Details are on page 28.

• When you turn on the power next time, the brightness

of the front panel display will be as set in setup menu.

Brightness of the Front Panel Display

• Actual output signals for each HDMI mode are differ

with the compatibility of the connected display device.

Refer to the table on page 10 for details of output pat-

terns of each HDMI mode.

E61E0/E1UD(EN).qx3 05.6.10 17:26 Page 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 91 92

Comments to this Manuals

No comments

Denon DVD-1920 User Manual Page 16

Comments to this Manuals

Related products and manuals for DVD players Denon DVD-1920