Denon DVD 555S Operations Instructions download pdf (Page 12)

–

1. DIGITAL OUT JACKS

Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).

2. 2ch AUDIO OUT JACKS

Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.

3. VIDEO OUT JACK

Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV, or Stereo system.

4. COMPONENT VIDEO OUT JACKS

Use these jacks if you have a TV with Component Video in jacks. These jacks provide C

and Y video. Along

with S-Video, Component Video provides the best picture quality.

5. S-VIDEO OUT JACK

Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher

quality picture.

Selecting Progressive Scan (525p/480p or Interlaced 525i/480i) Playback

¡If your TV is compatible with progressive scanning (525p/480p), connect the TV to the Component Video jacks of the DVD

player and set “PROGRESSIVE” to “ON” in the display setting. Next, set your TV to the progressive scan mode.

Refer to page 23 for instructions on changing the display setting.

¡If your TV is not compatible with progressive scanning, set “PROGRESSIVE” to “OFF”.

¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.

What is Progressive Scanning?

¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution

than that of traditional (525i/480i) television signals.

CONNECTIONS

Description - rear panel

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,Inc.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks

of Dolby Laboratories.

1 2 3 4 5

E5980_85UD(EN).qx3 04.4.23 6:27 PM Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Denon DVD 555S Operations Instructions Page 12