Denon POA-A1HDCI User Manual download pdf (Page 16)

• Connect the cables to be used (vpage 9 “Video Conversion

Function”).

• With HDMI connections, the video and audio signals can be

transferred with a single cable.

• To output the audio signals to the monitor with HDMI connections,

set GUI menu “Manual Setup” – “HDMI Setup” – “Audio” to “TV”

(vpage 32).

Connecting the Monitor

47*%&0

7*%&0

$0.10/&/57*%&0

: 1# 13

7*%&0

)%.*

*/ */

Monitor

Connecting the Playback Components

NOTE

• The component video connectors may be indicated differently on

your monitor. For details, see the monitor’s operating instructions.

• The audio signals output from the HDMI connectors are only the

HDMI input signals.

47*%&0

065

"6%*07*%&0

$0.10/&/57*%&0

: 1# 13

7*%&0

065 065

"6%*0

$0"9*"-

065

065065

)%.*

Carefully check the left (L) and right (R) channels and the inputs and

outputs, and be sure to interconnect correctly.

DVD Player

• Connect the cables to be used.

• With HDMI connections, the video and audio signals can be transferred

with a single cable.

DVD player

• Connect an HDP (High-Deﬁnition Player) in the same way.

• When using an optical cable or a BNC cable for the digital audio

connection, make the settings at GUI menu “Source Select” – “DVD”

– “Assign” – “Digital” (vpage 46).

• When using a BNC cable for the component video connection, make

the settings at GUI menu “Source Select” – “DVD” – “Assign” –

“Component” (vpage 47).

• When the AVP-A1HDCI and DVD player are connected using an

HDMI cable, also connect the AVP-A1HDCI and monitor using an

HDMI cable.

• If the connected monitor or DVD player only has a DVI-D

connector, use an HDMI/DVI converter cable. When using a DVI

cable, no audio signals are transmitted.

• Use a Deep Color compatible cable for connection to Deep Color

compatible devices.

NOTE

• Use a CPPM-compatible DVD player to play DVD-Audio discs that

are copyright-protected by CPPM.

• The audio signals output from the HDMI connector (sampling

frequency, bit rate, etc.) may be restricted by the connected

device.

• Video signals are not output properly when using devices that are

not HDCP-compatible.

• Video signals are not output if the input video signals do not match

the monitor’s resolution. In this case, switch the DVD player’s

resolution to a resolution with which the monitor is compatible.

• If the GUI menu “Manual Setup” – “HDMI Setup” – “Audio”

setting (vpage 32) is set to “Amp”, the sound may be

interrupted when the monitor’s power is turned off.

• Use a cable on which the HDMI logo is indicated (a certiﬁed HDMI

product) for connection to the HDMI connector. Normal playback

may not be possible when using a cable other than one on which

the HDMI logo is indicated (a non-HDMI-certiﬁed product).

• If the monitor or DVD player does not support Deep Color, Deep

Color signal transfer is not possible.

• If the monitor or DVD player does not support xvYCC, xvYCC

signal transfer is not possible.

• If the monitor does not support “Auto Lipsync Correction”

function, this function will not work.

• The AVP-A1HDCI is compatible with the HDMI’s CEC (Consumer

Electronics Control) function. Please note the following.

•

It may not work depending on the device it is connected to and

its setup.

•

It does not operate with televisions or players that are not

compatible with HDMI’s CEC.



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

AVPA1HDCIEU_0121.indd 16 2008/01/21 12:47:33

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 123 124

Comments to this Manuals

No comments

Denon POA-A1HDCI User Manual Page 16

Comments to this Manuals

Related products and manuals for Receiver Denon POA-A1HDCI