Denon AVR-2106 User Manual download pdf (Page 57)

ENGLISH

Specifications

2 Audio section

• Power amplifier

Rated output: Front: 90 W + 90 W

(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)

125 W + 125 W

(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Center: 90 W

(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)

125 W

(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Surround: 90 W + 90 W

(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)

125 W + 125 W

(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Surround Back: 90 W + 90 W

(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)

125 W + 125 W

(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Dynamic power: 120 W x 2 ch (8 Ω/ohms)

170 W x 2 ch (4 Ω/ohms)

200 W x 2 ch (2 Ω/ohms)

Output terminals: Front: A or B 16 ~ 16 Ω/ohms

A + B 12 ~ 16 Ω/ohms

Center, Surround, Surr.Back: 16 ~ 16 Ω/ohms

• Analog

Input sensitivity /

input impedance: 200 mV / 47 kΩ/kohms

Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)

S/N: 100 dB (IHF-A weighted) (DIRECT mode)

Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)

Rated output: 1.2 V

• Phono equalizer (PHONO input — REC OUT)

Input sensitivity: 2.5 mV

RIAA deviation: ±1 dB (20 Hz to 20 kHz)

S/N: 74 dB (A weighting, with 5 mV input)

Rated output /

Maximum output: 150 mV / 7 V

Distortion factor: 0.03 % (1 kHz, 3 V)

2 Video section

• Standard video terminals

Input / output level

and impedance: 1 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB

• S-Video terminals

Input / output level

and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

C (color) signal — 0.286 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB

• Color component video terminal

Input / output level

and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

PB/CB (blue) signal — 0.7 Vp-p, 75 Ω/ohms

PR/CR (red) signal — 0.7 Vp-p, 75 Ω/ohms

Frequency response: DC ~ 100 MHz — +0, –3 dB

2 Tuner section [FM] (note: µV at 75 Ω/ohms, [AM]

0 dBf=1 x 10

–15

Receiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz

Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV

50 dB Quieting

Sensitivity: MONO 1.6 µV (15.3 dBf)

STEREO 23 µV (38.5 dBf)

S/N (IHF-A): MONO 77 dB (IHF-A weighted)

STEREO 72 dB (IHF-A weighted)

Total Harmonic Distortion

(at 1 kHz): MONO 0.15 % (1 kHz)

STEREO 0.3 % (1 kHz)

2 General

Power supply: AC 230 V, 50 Hz

Power consumption: 450 W

Maximum external

dimensions: 434 (W) x 171 (H) x 417 (D) mm

Mass: 12.8 kg

2 Remote control unit (RC-1016)

Batteries: R6P/AA Type (two batteries)

External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm

Mass: 165 g (including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

Specifications

1 2 ... 52 53 54 55 56 57

Comments to this Manuals

No comments

Denon AVR-2106 User Manual Page 57

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-2106