Denon AVR-4306 User Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 146
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
Troubleshooting
Specifications
106
PageMeasuresCauseSymptom
21
42
42, 43
42
“NO SIGNAL” is
displayed in the XM
mode.
The signal cannot be received.
Reposition your XM Connect-and-
Play antenna.
“CHECK ANTENNA” is
displayed in the XM
mode.
•AVR-4306’s XM terminal and the
XM Connect-and-Play antenna is
not properly connected.
Check that the connection are
correct.
“OFF AIR” is displayed
in the XM mode.
The selected channel is not
currently broadcasting.
Select the another channel.
Receiving only XM
channels 0 and 1.
The XM Tuner is not activated. • Contact XM Radio.
Specifications
2 Audio section
Power amplifier
Rated output: Front:
130 W + 130 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Center:
130 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A, B):
130 W + 130 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
130 W + 130 W (8 /ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power: 150 W x 2 ch (8 /ohms)
220 W x 2 ch (4 /ohms)
Output terminals: Front, Center, Surr. Back 6 ~ 16 /ohms
Surround: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
S-Video terminals
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
P
B/CB signal — 0.7 Vp-p, 75 /ohms
P
R/CR signal — 0.7Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB
2 Tuner section
[FM] [AM]
(note: µV at 75 /ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB
STEREO 72 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 8.0 A
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 429 (D) mm (17-3/32” x 6-47/64” x 16-57/64”)
Mass: 18.5 kg (40 lbs 12.6 oz)
2 Remote control unit (RC-1024)
Batteries: LR6/AA Type (two batteries)
External dimensions: 63 (W) x 238 (H) x 31 (D) mm (2-31/64” x 9-3/8” x 1-7/32”)
Mass: 190 g (Approx. 6.7 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 145 146

Comments to this Manuals

No comments