Denon AVR-4306 User Manual download pdf (Page 91)

Advanced Setup – Part 2 Advanced Setup – Part 2

• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”

( page 83) is displayed at the top right of the screen.

•We recommend using with the crossover frequency set to

“80Hz”, but depending on the speaker, setting it to a different

frequency may improve frequency response near the crossover

frequency.

• The crossover frequency mode is valid only when subwoofer is

set to “ON”, and when one or more speakers are set to

“SMALL”, as described in section “Speaker Configuration”

settings ( page 82).

• If “LFE” is selected at “Subwoofer Setup”, the frequencies

can only be selected for speakers set to “Small” at “Speaker

Configuration”.

• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies

can be selected regardless of the speaker size setting.

• For the “WIDE SCREEN” and “7CH STEREO” DSP simulation

modes, the surround speakers can be set separately.

Setting the crossover frequency individually

for the different channels

Press the CURSOR

button to select

“Advanced” at the “Crossover Frequency”

screen.

Press the CURSOR

button to select the

speaker to be set.

Press the CURSOR

button to select the

frequency.

Selecting the Surround Speakers for the

different surround modes

• This menu is displayed when both surround speakers A and B

are used.

• At this screen preset the surround speakers to be used in each

surround modes.

Press the CURSOR

button to select

“Surround Sp Setup” at the “Speaker Setup”

menu, then press the ENTER button.

• The “Surround Sp Setup” screen appears.

Press the CURSOR

button to select the

surround mode, then press the CURSOR

button to select the surround speaker.

When surround speakers A is used.

When surround speakers B is used.

A + B:

When both surround speakers A and B are used.

Press the ENTER button to enter the setting.

• The “Speaker Setup” menu reappears.

Press the ENTER button to enter the setting.

• The “Speaker Setup” menu reappears.

2 About Speaker type setting when using both

surround speakers A and B

• If “Small” is set for either surround speakers A or B, the output

is the same as when “Small” is set for both A and B.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 145 146

Comments to this Manuals

No comments

Denon AVR-4306 User Manual Page 91

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-4306