Denon AVR-4306 User Manual download pdf (Page 72)

Advanced Setup – Part 1 Advanced Setup – Part 1

Make the audio-related settings.

Audio Input Setup

Setting the Digital In Assignment

This setting assigns the digital input terminals of the AVR-4306

for the different input sources.

Press the CURSOR

button to select

“Audio Input Setup” at the “System Setup

Menu”, then press the ENTER button.

• The “Audio Input Setup” menu screen appears.

Press the CURSOR

button to select

“Digital In Assign”, then press the ENTER

button.

• The “Digital In Assign” menu screen appears.

Press the ENTER button to enter the setting.

• The “Audio Input Setup” menu reappears.

Press the CURSOR

button to select the

input source, then press the CURSOR

button to select the digital input terminal.

Select from among COAX 1 to 2, OPT 1 to 5.

If the same digital input terminal is selected, the setting for

the input source that was previously assigned switches to

“OFF”.

The HDMI input terminal is displayed when it is assigned to

the input source at “HDMI In Assign” ( page 71).

When “Yes” is selected for “Default”, the settings are

automatically reset to the default values.

• The OPTICAL 3 and 4 terminals on the AVR-4306’s rear panel

are equipped with an optical digital output terminal for

recording digital audio signals to a CD recorder, MD recorder, or

other digital audio recording deck. Use this for digital recording

between a digital audio source (stereo – 2 channel) and a digital

audio recorder.

• “PHONO” and “TUNER” cannot be selected on the “Digital In

Assign” screen.

• When “DENON LINK” is assigned, PCM signals and Network

Audio signals (Internet radio, music server or USB) input from

the digital audio input terminal cannot be output from the

analog REC OUT terminals or ZONE2 / ZONE3 audio output

terminal ( page 60, 61 or 64).

• It is not possible to make the “Digital In Assign” settings for

the function assigned at “iPod Assign”.

Press the CURSOR

button to select the

input source, then press the CURSOR

button to select “DLINK”.

Select the input for the playback of signals that cannot be

transferred by DENON LINK.

Setting the EXT. IN Setup

• Set the method of playback of the analog input signal

connected to the EXT. IN (8CH) terminals.

• Refer to “Connecting the external inputs (EXT. IN) terminals”

( page 17).

Press the CURSOR

button to select

“DLINK” setting, then press the CURSOR

button to select the input signal (ANALOG or

EXT. IN).

Press the CURSOR

button to select “EXT.

IN Setup” at the “Audio Input Setup” menu,

then press the ENTER button.

• The “EXT. IN Setup” screen appears.

Press the CURSOR

button to select the

item to be set, then press the CURSOR

button to select the parameter.

2 Setting the DENON LINK

• When a DENON DVD player and the DENON LINK have been

connected, be sure to make a setting to “DENON LINK” with

“Setting the Digital In Assignment”.

• When the input mode is AUTO and the signals are not be able

to transferred by DENON LINK, the unit automatically changes

over the input to the selected signals (ANALOG or EXT. IN ).

• Refer to “DENON LINK connections” ( page 19).

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 145 146

Comments to this Manuals

No comments

Denon AVR-4306 User Manual Page 72

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-4306