Denon S-301 User Manual download pdf (Page 54)

ENGLISH

System Setup System Setup

-1

When “INPUT MODE” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

AUTO (Factory default):

In this mode, the type of signal being input to the digital and

analog input terminals is detected and the program in the

set’s surround decoder is switched automatically to play the

signals for the selected input function.

The presence or absence of digital signals is detected, the

signals input to the digital input are identified and decoding

and playback are performed automatically in DTS, Dolby

Digital or PCM (2 channel stereo) format.

If no digital signal is being input, the analog input terminals are

selected.

Use this mode to play Dolby Digital signals.

DTS:

Decoding and playback are only performed when DTS signals

are being input.

PCM:

Decoding and playback are only performed when PCM signals

are being input.

ANALOG:

The signals input to the analog input terminals are played.

(This cannot be selected in the DVD mode.)

Different input modes can be selected for each input

function. The selected input mode is stored in the memory

for the individual input functions.

When the input function is set to something other than the

above, “ANALOG ONLY” is displayed and the input mode

cannot be selected.

The input mode automatically switches to “AUTO” if you

switch the input function to DVD from anything other than

DVD.

INPUT MODE:

When DVD or AUX was selected as the input function, use

this to select the input mode.

SPEAKER SETUP:

“CHANNEL LEVEL” ( page 53), “DISTANCE” ( page

54) and “SPEAKER LOCATION” ( page 54, 55) can be set.

DIGITAL OUT:

Use this to select the digital output’s signal format.

LPCM (44.1 kHz / 48 kHz):

Use this to set the digital audio output when playing DVDs

recorded in linear PCM audio.

COMPRESSION:

Use this to adjusts the dynamic range of the Dolby Digital or

DTS sound.

Setting “AUDIO SETUP”

AUDIO DELAY:

Use this to synchronize the sound and video.

Press the CURSOR 0 or 1 button to select

“AUDIO SETUP” icon, then press the ENTER

button.

• The “AUDIO SETUP” menu screen appears.

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

SACD LAYER:

Use this to switch the area / layer of the Super audio CDs

played with priory.

NORMAL (Factory default):

Make the selection when playing back in surround playback a

DVD that has been recorded with Dolby Digital or DTS on this

unit.

The Dolby Digital or DTS digital signal is also output from the

digital output terminals.

PCM:

DVDs that were recorded in Dolby Digital or DTS are

converted to linear PCM 48 kHz/16 bit (2 channels). Make the

selection when making a digital recording.

When “DIGITAL OUT” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

-2

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 147 148

Comments to this Manuals

No comments

Denon S-301 User Manual Page 54

Comments to this Manuals

Related products and manuals for Acoustics Denon S-301