Denon S-301 User Manual download pdf (Page 67)

ENGLISH

System Setup System Setup

ENGLISH

Press the PROG/DIR. button for at least 3

seconds.

Input the 4-digit number corresponding to the

brand of the component whose signals are to be

stored in the preset memory (refer to the “List

of preset codes” ( End of this manual)).

• The code is set when 4 digits are input.

• Input the first digit within 3 seconds of performing step 2.

• Input the other digits within 60 seconds of each other.

• If any buttons other than the PROG/DIR. button or a

NUMBER button is pressed, the preset mode is canceled

and the previous settings remain valid.

• Set the MODE SELECTOR switch to the “DVD” position to

operate the S-301.

• When buttons are pressed while setting the preset memory,

their signals are sent from the remote control transmitter, so

cover the remote control sensor when setting the preset

memory to prevent accidental operation.

• Depending on the model and year of make, some of the remote

control codes for the brands included on the tables may not

operate properly.

• For some brands there are multiple types of remote control

codes. If an operation does not work, try changing to one of the

other codes.

Operate the component.

• For details, refer to the component’s operating

instructions.

It may not be possible to operate some models.

The buttons listed below can be used to operate the device

selected with the MODE SELECTOR switch.

SOURCE POWER, VIDEO INPUT, CHANNEL –, CHANNEL +, GUIDE,

CURSOR

•

and ENTER buttons

Special punch through setting

Normally use with the MODE SELECTOR switch set at “DVD”.

At this time, the SOURCE POWER, VIDEO INPUT, CHANNEL + and

CHANNEL – buttons are valid for the TV (default value). Perform

the operation below to make the buttons valid for the cable tuner

or satellite receiver.

Change MODE SELECTOR switch (TV, CABLE or

DBS) that intend to setup for special punch

through.

Press and hold ON/STANDBY button at least 3

seconds while SOURCE POWER button is held

down.

The unit will detect mode switch and setup

punch through setting.

• The default (TV) is set when the batteries are replaced,

so set over from step 1.

Operating the TV, cable tuner and satellite

receiver after storing its remote control

signals in the preset memory

Set MODE SELECTOR switch to the position of the

mode you want to operate (TV, CABLE or

DBS).

Default deviceMODE SELECTOR

TV, cable tuner and satellite receiver preset

memories

Components (TV, cable tuner or satellite receiver) of other brands

can be operated with the included remote control unit by storing

their codes in the preset memory.

SOURCE POWER, VIDEO INPUT, CHANNEL –, CHANNEL +, GUIDE,

CURSOR

•

and ENTER buttons on the remote control

unit (front) are valid for the device specified with this setting.

Note that depending on the model some operations may not be

possible and some buttons (SOURCE POWER, VIDEO INPUT,

CHANNEL –, CHANNEL +, GUIDE, CURSOR

•

or ENTER )

may not operate properly.

Set as shown below upon shipment from the factory.

CABLE

DBS

0047

0476

0392

RCA TV

Motorola

RCA SAT for DirecTV

Setting up the remote control unit to control other audio / video devices

Set MODE SELECTOR switch to the position of the

mode you want to operate (TV, CABLE or

DBS).

PROG/DIR.

NUMBER

CHANNEL

–

ON/STANDBY

SOURCE POWER

VIDEO INPUT

MENU/GUIDE

ENTER

MODE SELECTOR

CURSOR

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 147 148

Comments to this Manuals

No comments

Denon S-301 User Manual Page 67

Comments to this Manuals

Related products and manuals for Acoustics Denon S-301