Denon S-301 User Manual download pdf (Page 55)

ENGLISH

System Setup System Setup

When “COMPRESSION” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

-5

When “SACD LAYER” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

-4

MULTI:

When playing a Super Audio CD disc, the multi-channel area

will be played back with priority.

STEREO (Factory default):

When playing a Super Audio CD disc, the stereo area will be

played back with priority.

When playing back a disc that does not have a selected

area/layer, another area/layer will be played back

automatically.

CD:

When playing a Super Audio CD disc, the CD layer will be

played back with priority.

When playing Dolby Digital / DTS surround DVDs or 96 kHz

linear PCM DVDs on the S-301, be sure to set “DIGITAL

OUT” to “NORMAL” and “LPCM (44.1 kHz/48 kHz)” to

“OFF”.

When and only when you want to output the signals of the

Dolby Digital / DTS surround DVD being played on the S-301

to a digital PCM components, set “DIGITAL OUT” to

“PCM”.

With this setting, DVDs cannot be played on the S-301 in the

Dolby Digital / DTS surround mode. (The surround mode is

set to the mode in which PCM 2-channel signals can be

played.)

When and only when you want to make a digital recording

of the signals of a 48 kHz/20-bit/24-bit or 96 kHz linear PCM

DVD being played on the S-301 onto a digital recorder, set

the “LPCM (44.1 kHz/48 kHz)” to “ON”.

With this setting it is not possible to decode and play 48

kHz/20-bit/24-bit or 96 kHz linear PCM signals on the S-301

during recording. (Decoding and playback is in 48 kHz/16-bit

linear PCM format.)

When “LPCM (44.1 kHz/48 kHz)” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

-3

ON:

DVDs that were recorded with linear PCM 48 kHz/20/24 bit

and 96 kHz modes are all converted to 48 kHz/16 bits. Make

this selection at the time of digital recording.

OFF (Factory default):

Make the selection when playing back to a decoder DVDs that

were recorded with this unit using linear PCM 48 kHz/20/24

bit and 96 kHz modes. Note that DVDs with Copyright

Protection are converted to 48 kHz/16 bits and played back.

The same signal is output from the digital output terminals.

When “AUDIO DELAY” is selected:

Press the CURSOR

•

button to select the

desired setting item, then press the ENTER

button.

-6

0 ~ 200mSEC (Factory default 0mSEC) :

When watching a DVD or other video source, the picture on the

monitor may seem delayed with respect to the sound. In this

case, adjust the audio delay to delay the sound and synchronize

it with the picture.

The audio delay setting is stored separately for each input

source.

With a movie source, for example, adjust so that the

movement of the actor‘s lips is synchronized with the sound.

The audio delay setting does not apply when playing in the

analog input and stereo mode (DIRECT ON).

Press the CURSOR

button to select “NEXT

SETUP MENU”, then press the ENTER to enter

the setting.

• The next screen in the “SETUP” menu screen appears.

OFF (Factory default):

Set to “OFF” to turn this function off.

LOW, MID, HIGH:

This parameter adjusts the dynamic range of the Dolby Digital or

DTS sound. When listening with the volume turned relatively

low, at night for example, set this to the “HIGH” side to lower

the peak of the sound and amplify the quieter sounds, narrowing

the dynamic range and making the sound easier to listen to.

With DTS source, only displayed for sources compatible with

dynamic range compression.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 147 148

Comments to this Manuals

No comments

Denon S-301 User Manual Page 55

Comments to this Manuals

Related products and manuals for Acoustics Denon S-301