Denon AVR-1683 Operations Instructions download pdf (Page 10)

, _

_ switch on the main unit to turn on the power

{Main unit)

Press the SYSTEM SETUP button to enter the setting

,++,..+.,.+:,]

NOTE: Please make sure the "AUDIO" position of the slide switch on the

remote control unit

Use the _ (left) and _ {right) buttons to select your subwoofer setting

(Initia0

(left) button (right) button

Press the ENTER or _ (down) button to enter the settings and switch to the

SUBWQQFER MODE setting

• Parameters

Large ...... Select this when using speakers that can fully reproduce low sounds of below 80 Hz

Small ...... Select this when using speakers that cannot reproduce low sounds of below 80 Hz with sufficient

volume¸ When this setting is selected, low frequencies of below 80 Nz are assEgned to the subwoofer

None ...... Select this when no speakers are installed¸

Yes/No Select "Yes" when a subwoofer is installed, "No" when it's not installed¸

_ ._. Press the ENTER or _ (down) button to switch to the speaker

configuration set up

NOTE:

Press the SYSTEM SETUP button again to finish system set up System set up can be finished at any time The

changes to the settings made up to that point are entered

(left) button (right) button

NOTE:

Select "Large" or "SmaW' not according to the physical size of the speaker, but according to the bass reproduction

capacity at 80 Hz If you cannot determine the best setting, try comparing the sound when set to "Small" and

when set to "Large", at a level that will not damage the speakers

Caution:

In case the subwoofer is not used, be sure to set "Subwoofer = No", or the bass sound of front channel is divided

to subwoofer channel and not reproduced in some mode

Press the ENTER or _ (down) button to switch to the center speaker setting

Use the _ (left) and _ (right) buttons to select the Subwoofer mode

(Initial)

r 1

5 ':S+,.+HOE:+Ei-K:+RH _ _

(left) button (right) button

Press the ENTER or _ (down) button to enter the setting and switch to the

Crossover Frequency setting

_ _ _ Use the (_ (left)and _) (r,ght)buttonsto selectyour centerspeaker type(In,t,a,) _ (_ _._

r:2 +:::EI.++._:.:+4:::::q,++.:++..L] ¢_

(_4_ {left) button {right) betton (_

Press the ENTER or _ (down) button to switch to the surround speaker setting

NOTE:

• When "Small" has been selected for the front speakers, "Large" cannot be selected for the center speaker

Use the _ (left) and _ {right) buttons to select the Crossover Frequency

(Initial)

r ,,,+.+-1

(left) button (right) button

Press the ENTER or _ (down) button to enter the setting and switch to the

SPEAKER DISTANCE setting

,ca-,

NOTE:

Use the _ (left) and _ (right) buttons to select your surround speaker type

(Initial)

r:!!:"++-' -++-1

(left) button (right) button

Press the ENTER or _ (down) button to switch to the subwoofer setting

• When "Small" has been selected for the front speakers, "Large" cannot be selected for the surround speakers

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 194 195

Comments to this Manuals

No comments

Denon AVR-1683 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1683