Denon AVR-1683 Operations Instructions download pdf (Page 18)

1 Folow step 1 to 3 under "Playing the input source" _ Star[ recording on the tape or video deck

For instructions, refer to the component's operating

instructions

Simultaneous recording

The signals of the source selected with the function se(ector button are output simukaneously to the

CDR/TAPE and VCR AUDIO OUT iacks If a total of two tape and/or video decks are connected and set to

the recording mode, the same source can be recorded simultaneously on every decks

NOTES:

• The AUDIO IN's signal selected with the function selector button are output to the CDR/TAPE and VCR

AUDIO OUT jacks

• The DIGITAL JN's signal selected with the function selector button are output to the DIGITAL OUT {OPTICAL)

iack

r_SURROUND

• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each

speakers This adjustment can be performed from the remote control unit, as (described) below

• The adiusfment with the test tones is only effective in the DQLBY/DTS SURROUND modes

The adiusted playback levels for the different surround modes are automaticaly stored in the memory of each

surround modes

Set the DOLBY/DTS SURROUND (Dolby Pro

Logic 1 or DoIby Digital or DTS) modes

(Main unit} (Remote control _it}

To,

Press the TEST TONE button _r_

(£emote control unk_

Test tones are output from the

different speakers Use the W

channel volume adjust buttons 4_ _._\

to adjust so that the volume of

the test tones is the same for

at the speakers (£emotecontrolu_it_

NOTE: Rease make sure the "AUDIO" position

of the slide switch on the remote control

unit

After completing the adjustment, press the

TEST TONE button again

{Remote control ur_k)

2, 3 _

Ee_

• After adjusting using the test tones, adiust the channel levels either according to the playback sources or to

suit your tastes, as (described) below

Select the speaker whose level you want to

(2? e 66o

{Main ur_k) (Remo e contro ur_]l _

The channel switches as shown below each time 2 1

the button is pressed

NOTE: P(ease make sure the "AUDIO" position

of the slide switch on the remote control

unit

Adjust the level of the selected speaker

{Main urn]t)

Only adjustable when

the channel is

selected with the CN

VOL buttons on the

ma_n unit

{Remote control urn]t)

Default setting of channel level is 0 dB

The level of the selected speaker can be adiusted

within theiange of +12 fo-12 dB

SW channel level can be turned off by decreasing

one step from -12 dB

OFF 44-I2 dB 44 12 dB

I°::o:o

600 loo _q_T_

1 2 4,6 5,7

Select the function to which the component you

want to play is connected

Example:

{Main unit) (Remote contro unit)

5,7

The Dolby Surround Pro

Logic I Cinema or Music

mode can be chosen

directly by pressing the

CINEMA or MUSIC

button on the remote

control unit during

playback in the DoIby

Surround Pro Logic 1

mode

4,6

5,7

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 194 195

Comments to this Manuals

No comments

Denon AVR-1683 Operations Instructions Page 18

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1683