Denon AVR 2805 - AV Receiver Operations Instructions download pdf (Page 33)

Select the mode.

Select “Auto” or “Manual”.

Example: When the “Auto” mode is selected

Select “Test Tone Start”.

Select “Ye s”.

a. When the “Auto” mode is selected:

Test tones are automatically emitted from each speaker.

The test tones are emitted from each speaker in the following

order, at 4-second intervals the first time and second time around, 2-

second intervals the third time around and on:

Use the CURSOR left and right buttons to adjust all the speakers to the

same volume.

The volume can be adjusted between –12 dB and +12 dB in units of 0.5 dB.

b. When the “Manual” mode is selected :

Example: When the volume is set to –11.5 dB

while the test tone is being

produced from the Front Lch

speaker

Flashing

FL C FR SR SBR SBL SL SW

1spkr

2spkrs

When the surround back speaker setting is set to “1spkr” for

“Speaker Configuration”, this is set to “SB”.

(Remote control unit)

Tone Start:Yes

*Channel Level

(Remote control unit)

FL : -11.5dB

TestTone Auto

T.Tone: Auto

*Channel Level

• Auto:

Adjust the level while listening to the test tones produced

automatically from each speaker.

• Manual:

Select the speaker from which you want to produce the test tone to adjust the level.

q Select the speaker.

w Adjust all the speakers to the same volume.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 99 100

No comments

Denon AVR 2805 - AV Receiver Operations Instructions Page 33