Denon AVR-3805 Operations Instructions download pdf (Page 36)

ENGLISH

OPERATION

Operating the remote control unit

Select“AMP”using the AMP/TUNER button.

[SOURCE MENU]

• Operate the source.

[SURROUND MENU]

• Operate the surround mode.

434

Before operating

Refer to “CONNECTIONS” (pages 5 to 9) and

check that all connections are correct.

Select “AMP” using the AMP/TUNER button.

(only when operating with the remote control

unit)

(Main unit)

• ¢ ON

The power turns on and indicator is light.

Set the power switch to this position to turn

the power on and off from the included

remote control unit.

• £ OFF

The power turns off and indicator is off.

In this position, the power cannot be turned

on and off from the remote control unit.

Press the POWER switch (button).

(Remote control unit)

When pressed, the power turns on and the display lights. The sound is muted for several seconds, after

which the unit operates normally. When pressed again, the power turns off, the standby mode is set and

the display turns off.

Turn on the power

Press the POWER ON/STANDBY switch (button).

(Remote control unit) (Main unit)

Playing the input source

RC-970

Select the input source to be played.

Example: CD

To select the input source

when ZONE2/ZONE3/REC

OUT or TUNING PRESET is

selected, press the SOURCE

button then operate the input

function selector.

(Remote control unit) (Main unit)

AUTO PCM DTS

• Selecting the external input (EXT. IN) mode

Press the EXT. IN (on the EXT. IN button on

the remote control unit) to switch the external

input.

(Remote control unit) (Main unit)

• Selecting the AUTO, PCM and DTS modes

The mode switches as shown below each

time the INPUT MODE button is pressed.

Input mode selection function

Different input modes can be selected for the different

input sources. The selected input modes for the

separate input sources are stored in the memory.

q AUTO (auto mode)

In this mode, the types of signals being input to

the digital and analog input jacks for the selected

input source are detected and the program in the

AVR-3805’s surround decoder is selected

automatically upon playback. This mode can be

selected for all input sources other than PHONO

and TUNER.

The presence or absence of digital signals is

detected, the signals input to the digital input jacks

are identified and decoding and playback are

performed automatically in DTS, Dolby Digital or

PCM (2 channel stereo) format. If no digital signal

is being input, the analog input jacks are selected.

Use this mode to play Dolby Digital signals.

w PCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when

PCM signals are being input.

Note that noise may be generated when using this

mode to play signals other than PCM signals.

e DTS (exclusive DTS signal playback mode)

Decoding and playback are only performed when

DTS signals are being input.

r ANALOG (exclusive analog audio signal playback

mode)

The signals input to the analog input jacks are

played.

t EXT. IN (external decoder input jack selection

mode)

The signals being input to the external decoder

input jacks are played without passing through the

surround circuitry.

NOTE:

• Note that noise will be output when CDs or LDs

recorded in DTS format are played in the “PCM”

(exclusive PCM signal playback) or “ANALOG”

(exclusive PCM signal playback) mode. Select the

AUTO or DTS mode when playing signals recorded

in DTS from a laser disc player or CD player.

(Main unit)

Select the input mode.

• Selecting the analog mode

Press the ANALOG button to switch to the

analog input.

(Remote control unit) (Main unit)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Comments to this Manuals

No comments

Denon AVR-3805 Operations Instructions Page 36

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-3805