Denon AVR-3805 Operations Instructions download pdf (Page 38)

ENGLISH

Playing audio sources (CDs and DVDs)

PURE DIRECT mode

In this mode, the music is played with an

extremely high level of sound quality.

When this mode is set, all the video-related

circuits are turned off so that music signals can

be reproduced with high quality. When an

analog mode is selected, the digital processing

circuitry is also turned off to achieve analog

sound with even higher purity. (See NOTES)

RC-970

1~3

312

The AVR-3805 is equipped with three 2-channel playback modes exclusively for music.

Select the mode to suit your tastes.

(Remote control unit) (Main unit)(Remote control unit)

DIRECT mode

Use this mode to achieve good quality 2-

channel sound while watching images. In this

mode, the audio signals bypass such circuits as

the tone circuit and are transmitted directly,

resulting in good quality sound.

(Remote control unit) (Main unit)(Remote control unit)

Using this mode, the DSD (2-

channel/MULTI-channel) signal can be

reproduced with high quality.

• The display in 2-channel input.

DSD DIRECT

• The display in MULTI-channel input

DSD MULTI DRCT

STEREO mode

Use this mode to adjust the tone and achieve

the desired sound while watching images.

(Remote control unit) (Main unit)(Remote control unit)

VIDEO ON/OFF button

When no video signals of a

DVD, etc., are connected to

the AVR-3805 and the DVD,

etc., are connected directly to

a TV, etc., the unneeded video

circuitry can be turned off by selecting the

“VIDEO OFF” setting.

(Remote control unit)

NOTES:

• The system setup function cannot be used when the

PURE DIRECT mode is set. To use the system setup

function, cancel the PURE DIRECT mode.

• The ZONE2 video output is not output in the PURE

DIRECT mode.

• The channel level and surround parameters in the

PURE DIRECT mode are the same as in the DIRECT

mode.

• When the PURE DIRECT button is pressed while in

the PURE DIRECT mode, the PURE DIRECT mode is

cancelled.

• The subwoofer’s channel level must be set to “OFF”

in order to turn off the digital circuit in the PURE

DIRECT mode.

BASS TREBLE

[1] Adjusting the sound quality (TONE)

The tone control function will not work in the PURE DIRECT and the DIRECT mode.

After starting playback

The tone switches as follows each time the

TONE CONTROL button is pressed.

(Main unit)

With the name of the volume

to be adjusted selected,

press cursor button to adjust

the level.

CH SEL

ENTER

(Main unit)

• To increase the bass or treble: Press the

button.

(The bass or treble sound can be increased to

up to +6 dB in steps of 1 dB.)

• To decrease the bass or treble: Press the

button.

(The bass or treble sound can be decreased to

up to –6 dB in steps of 1 dB.)

If you do not want the bass and treble to be

adjusted, turn on the tone defeat mode.

(Main unit)

The signals do not pass

through the bass and treble

adjustment circuits, providing

higher quality sound.

[2] Listening over headphone

Plug the headphone’ plug

into the jack.

Connect the headphone

to the PHONES jack.

The pre-out output

(including the speaker

output) is automatically

turned off when

headphone are

connected.

PHONES

NOTE:

To prevent hearing loss, do not raise the volume level

excessively when using headphone.

[3] Turning the sound off temporarily (MUTING)

Use this to mute the audio

output temporarily.

Press the MUTING button.

Cancelling MUTING

mode.

Press the MUTING

button again.

(Remote control unit)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Comments to this Manuals

No comments

Denon AVR-3805 Operations Instructions Page 38

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-3805