Denon AVR-5800 Operations Instructions Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 112
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
21
NOTES:
— Assignment of low frequency signal range —
The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low
frequency signal range of channels set to “SMALL” in the setup menu. The low frequency signal range of channels set to “LARGE” are
produced from those channels.
— Subwoofer mode —
The subwoofer mode setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer in the “Speaker
Configuration” settings (see page 19).
When the “LFE+MAIN” playback mode is selected, the low frequency signal range of channels set to “LARGE” are produced
simultaneously from those channels and the subwoofer channel.
In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room,
interference may result in a decrease of the actual volume of the low frequency range.
Selection of the “LFE - THX” play mode will play the low frequency signal range of the channel selected with “LARGE” from that channel
only. Therefore, the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE
(only during Dolby Digital or DTS signal playback) and the channel specified as “SMALL” in the setup menu. THX is recommended in this
play mode so that bass interference is less likely to occur in the room.
Select the play mode that provides bass reproduction with body.
Setting the Surround Back channel
Set the operation for the digital signals when playing in the 6.1 SURROUND, DTS-ES and THX SURROUND EX surround modes.
1
At the System Setup Menu select “SB CH Auto Flag Detect” and press
the ENTER button.
2
Select the desired setting.
We recommend setting this to
“OFF”.
When set to “ON”, the
operation for software for which
no identification signals are
recorded is set.
3
Enter the setting.
The System Setup Menu reappears.
THX surround EX/DTS ES Auto Flag Detect Mode (AFDM) setting
OFF................Set the “OFF” mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the
identification signal described below is not recorded.
ON .................This function only works with software on which a special identification signal is recorded. This software is scheduled to go
on sale in the future.
This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded
in THX Surround EX or DTS-ES or in the normal 5.1-channel mode without using the surround back speakers when the software
is not recorded in THX Surround EX or DTS-ES.
Non-Flag Source SB ch Output setting
OFF................Playback is conducted without using the surround back speaker.
Non MTRX.....Playback is conducted using the surround back speaker. The same signals as those of the surround channels are output from
the surround back channel.
THX surround EX/DTS ES..........Playback is conducted using the surround back speaker.
Surround back channel is reproduced using digital matrix processing.
NOTES:
The “SB CH Auto Flag Detect” setting screen is displayed when the surround back speaker is set to “Large” or “Small” at “Speaker
Configuration”.
The surround back speakers can also be turned on and off using the “SB CH OUT” surround parameter. (See pages 51.)
Select the setting according to the program source to be played.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 111 112

Comments to this Manuals

No comments