Denon DN-A7100 - AV Surround Preamplifier User's Guide download pdf (Page 24)

ENGLISH

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT AND COMPONENT VIDEO INPUT)

6 digital inputs, 3 component video inputs and 2

HDMI inputs can be assigned to a desired source.

Use this menu to select the digital input jack to be

assigned to the input source.

Select “INPUT SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

1-1 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

TV :AUTO : 3 : - : -

DVD :AUTO : 1 : 1 : 1

VCR1:AUTO : - : - : 3

DSS :AUTO : 2 : 2 : 2

AUX1:AUTO : A : - : -

MAIN NEXT EXIT

1-2 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

CD :AUTO : 4 : :

TAPE:AUTO : - : :

CD-R:AUTO : 5 : :

AUX2:AUTO : - : :

MAIN RETURN EXIT

To select the input source and MODE, press

the 3 or 4 cursor buttons.

To select

“DIG”

“HDMI” or “COMP” for the input

jack, press the 1 or 2 cursor buttons.

Select “DIG” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “DIG”, when only a digital signal will be

used.

Select “ANA” for input sources for which

no digital input jacks are used.

To select the vdieo source, select “HDMI” or

“COMP” by pressing the 3 or 4 cursor buttons,

and press the 1 or 2 cursor buttons to select

the vdieo source to be assigned .

After you complete this portion of the set up,

move the cursor to MAIN with the 3 or 4 cursor

buttons and press the ENTER button.

Notes:

• When the TUNER is ﬁ xed to the analog input, you

can not select any digital input.

• When a DTS-LD or DTS-CD is playing, this setup is

not available. This is to avoid noise being generated

from the analog input.

• If “DIG” is selected and a DVD, compact disc or

LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such cases,

change the setting to DIGITAL.

2 SPEAKER SETUP

After you have installed the DN-A7100, connected all

the components, and determined the speaker layout,

it is now time to perform the settings in the Speaker

Setup menu for the optimum sound acoustics for

your environment and speaker layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

2-1 SPEAKERS SIZE

When setting the speaker size in the SPEAKER

SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel you

are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting lower

than approx. 100 Hz will be output from the

subwoofer.

If the Subwoofer is set to “NONE” and the front

speakers are set to “LARGE,” then the sound will

be output from both the left and right speakers.

2-1 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L/R : LARGE

CENTER : SMALL

SURROUND L/R : SMALL

SURR.BACK : 2CH

SURR.BACK SIZE : SMALL

LPF/HPF : 100Hz

BASS MIX : BOTH

MAIN NEXT EXIT

Select “SPEAKER SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

To select the each speaker, press the 3 or 4

cursor buttons.

To select the setting of each speaker size,

press the 1 or 2 cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the 3 or 4

cursor buttons and then press the ENTER

button to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is ﬁ xed to “LARGE.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

NONE:

Select if no surround back left and right speakers

are connected.

2CH:

Select if the surround back left and right speakers

are connected.

1CH:

Select if the one surround back speaker is

connected.

In this case, the audio signal is emitted form the

Surround back L output terminal.

Notes:

If “NONE” is selected for the Surround L/R setting,

then this setting is ﬁ xed to “NONE.”

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Comments to this Manuals

No comments

Denon DN-A7100 - AV Surround Preamplifier User's Guide Page 24

Comments to this Manuals

Related products and manuals for AV receivers Denon DN-A7100 - AV Surround Preamplifier