Denon DN-M1050R Operations Instructions download pdf (Page 40)

ENGLISH

(2) Presetting Procedure

•

Functions can be preset using the buttons on the front panel.

•

The presettings can also be set using serial remote signals

(RS232C/RS422A).

•

Presettings can be made when no cartridge is loaded or when

in the stop, standby, pause, recording pause or recording

monitor mode.

（

Enter the preset mode.

Press the STANDBY/CUE button while pressing the PLAY

MODE button.

PLAY MODE

STANDBY/CUE

Exit the preset mode.

Press the PLAY MODE button.

PLAY MODE

To set the presettings back to the initial settings (the

settings set upon shipment from the factory)

Turn the power on while holding in both the PLAY MODE

and the END MON buttons. For the initial settings, refer to

“(1) List of preset functions”.

LAY MODE END MON

Change the preset values.

Press the select knob.

Select the preset item.

Turn the select knob (

8 – 9).

NOTE: The first preset item displayed is the last preset

item displayed the last time the presettings were

made.

Character display

Turn the knob cloc-

kwise to move in the

direction of the

arrows, counterclock-

wise to move in the

opposite direction.

The character display changes as

shown below.

Before change After change

The preset mode is canceled and the set returns

to the previous mode.

The character display changes as

shown below.

NOTE:

If the message shown below appears, there is a problem with

the preset memory. Contact a serviceperson.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments

Denon DN-M1050R Operations Instructions Page 40

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-M1050R