Denon DN-M1050R Operations Instructions download pdf (Page 41)

ENGLISH

(3) Detailed Description of Preset Functions

(* = initial setting)

1) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)

* Preset Type1 : Set to preset type 1.

Preset Type2 : Set to preset type 2.

Preset Type3 : Set to preset type 3.

2) “Finish (*)”

Finish Stop : Stop mode is set after track playing is finished.

* Finish Next : Standby mode is set at next track after track playing is finished.

Finish Rescue : Standby mode is set at playback start position after track playing is finished.

3) “CueDet. OFF (-**)dB”

* CueDet.OFF : Sound is not detected when cueing.

CueDet.(-**)dB : Sound detection level setting for cueing. (-72/-66/-60/-54/-48/-42/-36)

4) “Auto Inc OFF (*)”

* Auto Inc OFF : No auto increment of track number.

Auto Inc Dig. : Track number is automatically incremented during digital recording using subcodes on CDs or MDs (Q codes) or start

IDs on DATs.

Auto Inc Det. : Track number is automatically incremented during recording when level set in “5) “Inc Det. (-**)dB” setting is

detected.

5) “Inc Det. (-**)dB”

Inc Det.(-**)dB : Sound detection level for auto increment function. (-72/-66/*-60/-54/-48/-42/-36)

6) “Pre UTOC OFF (ON)” (Playback is possible up to that point even if power supply is cut off during recording or if recording stops due to some

problem.)

* Pre UTOC OFF : Pre-UTOC function off.

Pre UTOC ON : Pre-UTOC function on.

7) “UTOC Manual (Auto)”

* UTOC Manual : UTOC is written by pressing TOC WRITE button after editing is completed.

UTOC Auto : UTOC is written automatically when editing is completed.

8) “RecStart (-**)dB”

RecStart (-**)dB : Sound detection level for auto record start function. (-72/-66/*-60/-54/-48/-42/-36)

9) “Rec Offset (*)” (Recording can be started before sound detection during auto record start operation.)

Rec Offset (*) : Recording starts the set number of seconds before level detection. (*OFF/1s/2s/3s/4s/5s)

10) “Rec Stereo (Mono)”

* Rec Stereo : Record in stereo.

Rec Mono : Record left channel signal in mono.

11) “SCMS INH (ENA)”

* SCNS INH : Record onto disc same code as copy prohibit code in recording source.

SCMS ENA : Record copy prohibit code on disc according to SCMS.

12) PitchAuto OFF (ON)”

* PitchAuto OFF : Play pitch data stored on disc not used.

PitchAuto ON : Play disc at play pitch stored on disc.

13) “Sleep ON (OFF)”

* Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual

search mode.

Sleep OFF : Do not automatically turn the servo functions off.

14) “FS OFF (***kHz)” (This setting can only be made when an optional FS converter is mounted.)

* FS OFF : Do not use the FS converter.

FS (***kHz) : Select the digital output FS. (32 kHz/44.1 kHz/48 kHz)

15) “Hot Start OFF (ON)” (Hot start can be set when optional hot start unit is mounted.)

* Hot Start OFF : Hot start off.

Hot Start ON : Hot start on.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments

Denon DN-M1050R Operations Instructions Page 41

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-M1050R