Denon DN-X800 Operations Instructions download pdf (Page 19)

ENGLISH

qt e w, r, t

Splice point setting mode

q Push the SPLICE button

for more than 1 sec to

enable setting Splice point

using A1, A2 and B

buttons.

• The A button illumination flashes when

the Splice mode is set.

• The Splice point setting cannot be set for

the A point at which Hot Start data is

already loaded.

A / B TRIM

SPLICE

Splice

Set splice start point A

w After starting playback, push

the A1 or A2 button. The

corresponding A button

lights up and that point is set

as splice start point A, and B

LED start flashing.

Set splice end point B

e After setting splice start

point A, push the B button.

The B LED lights up and that

point is set as splice end

point B.

Temporarily turning off the splice playback

r When the corresponding A

button is pushed after

setting splice points A and B,

the A button illumination

turns off and the Splice play

mode is temporarily turned

off.

• Push the corresponding A button again

to resume splice playback.

• Use this function to skip a section between A and B points. The A point is the point from which jumping starts,

the B point the point at which jumping ends.

• The A1 and A2 Hot Starts and Stutter functions cannot be used if both Splice points are set in the Splice mode.

Start splice playback

Start playback from any point before point A.

When point A is reached, the section from

point A to point B is jumped seamlessly and

playback continues.

Clearing the splice points

t While pressing the FLIP/(CLR) button, push

the corresponding A button to clear splice

points A and B.

• When the splice points are cleared, the

A button is set back to the Hot Start

mode.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

Comments to this Manuals

No comments

Denon DN-X800 Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X800