Denon DN-X800 Operations Instructions download pdf (Page 28)

∗

ENGLISH

GENERAL

Type: Compact disc player

Disc type: Standard compact discs (12 cm discs), CD-TEXT

CD-R, CD-RW discs

NOTE: Finalized CD-R or CD-RW discs can be played back in this unit.

However, according to recording quality, some CD-R/RW discs

cannot be played.

Dimensions: Player unit: 285 (W) x 111.5 (H) x 327 (D) mm (without feet)

11-7/32” (W) x 4-25/64” (H) x 12-7/8” (D)

Installation: Table top type

Mass: Player unit: 5.7 kg (12 lbs 9 oz)

Power supply: U.S.A., Canada and Taiwan R.O.C. models: 120 V AC ±10%, 60 Hz

European models: 230 V AC ±10%, 50 Hz

Power consumption: 18 W

Environmental conditions: Operational temperature: 5 to 35°C (41 to 95°F)

Operational humidity: 25 to 85% (no condensation)

Storage temperature: –20 to 60°C (4 to 140°F)

AUDIO SECTION

Main out, Monitor out

Quantization: 24-bit linear per channel

Sampling frequency: 44.1 kHz at normal pitch

Oversampling rate: 8 times

Total harmonic distortion: 0.01% or less

Signal to noise ratio: 90 dB or more

Channel separation: 85 dB or more

Frequency response: 20 to 20,000 Hz

Analog output

Output level: 2.0 V r.m.s.

Load impedance: 10 kΩ/kohms or more

Digital output

Signal format: SPDIF

Output level: 0.5 Vp-p 75 Ω/ohms

FUNCTIONS

Instant start: Within 20 msec.

Variable pitch: ±4% (0.05% pitch), ±10% (0.1% pitch), ±16% (0.1% pitch)

±24% (0.1% pitch), ±100% (1.0% pitch)

Pitch bend: Pitch range ±32%

Pitch range ±100%: ±99%

Sampler

Sampling: 44.1 kHz

Length: 15 sec.

Output level: 2.0 V r.m.s. (Variable / -14 ~ +6 dB)

Variable pitch: ±24% (0.1% pitch)

Search precision: 1/75 sec. (1 subcode frame)

Max. scan speed: Over 20 times normal speed

Max. MEMO memory steps: 5000 steps

✽ Specifications and design are subject to change without notice for purpose of improvement.

SPECIFICATIONS

1. Remove a screw (Hexagon socket head) and

pull out Scratch Disc and Slip Mat.

2. Remove Belt from Motor Pully.

3. Remove 3 screws (< head) and pull out

Platter.

4. Remove Belt from Platter.

5. Mount in the order 4 → 1.

Platter

Stabilizer

(Hexagon socket head)

Scratch Disc

Slip Mat

Belt

Motor Pully

(< head)

CAUTIONS:

• Unplug the power cord before replacing the

belt.

• Do not touch the sensor or scale(∗) when

removing the Platter.

• Do not apply oil or grease to the belt when

replacing it.

Belt

Platter

(< head)

REPLACING THE BELT

• On the DN-S5000, the platter is driven by a belt.

In the unlikely case of trouble, use the procedure described below to replace the belt.

Slip Sheet

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 48 49

Comments to this Manuals

No comments

Denon DN-X800 Operations Instructions Page 28

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X800