Denon DVM-4800 Operations Instructions download pdf (Page 53)

ENGLISH

2. Yes

During playback of the DVD recorded in Linear PCM of 48 kHz or 96kHz,

digital audio converted to 48 kHz/16 bit is output.

(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for

r When “Dolby Digital” is selected

1. Bitstream (Factory default) (NOTE 1 )

Dolby Digital bitstream (1 ch - 3/2.1 ch) is output during playback of the

DVD recorded in the Dolby Digital.

Select this setting when the player is connected to the Dolby Digital

decoder.

2. PCM

Digital audio converted to PCM (2ch) of 48 kHz/16 bit is output during

playback of the DVD recorded in the Dolby Digital.

t When “DTS Digital Surround” is selected

1. PCM (Factory default)

When you have connected a unit that does not have a built-in DTS

decoder.

2. Bitstream

DTS bitstream is output during playback of the DVD recorded in DTS.

Select this setting when the player is connected to the DTS decoder.

y When “D. Range Compression” is selected

1. Off (Factory default)

Select this for the standard range.

2. On

Select this to achieve powerful sound even when the volume is low.

This setting is suited for watching DVDs late at night with the volume

low. (This setting is only valid for DVDs recorded in Dolby Digital.)

u When “Audio during search” is selected

1. On (Factory default)

Select this to output sound during the search operation in speed 1.

2. Off

Select this to turn off the sound during the search operation in speed 1.

• Recommended “Audio” settings

The optimum digital output setting depends on the type of component connected to the digital audio output connector.

When nothing is connected to the digital audio

output connector

When an amplifier equipped with a digital input

connector and with no built-in Dolby Digital decoder

and DTS decoder is connected to the digital audio

output connector

When a Dolby Digital decoder is connected to the

digital audio output connector

When a Dolby Digital and/or DTS decoder is connected

to the digital audio output connector

No (factory default)

Yes (NOTE 1)

Bitstream (factory default)

PCM (NOTE 2)

Bitstream (factory default)

PCM (factory default)

Bitstream

NOTES:

1. When connecting an amplifier (with an optical/coaxial digital input connector) which does not contain the Dolby Digital or dts decoder, be sure

to select “PCM” at the “Dolby Digital” and “PCM” at the “dts”. If “Bitstream” is selected, any attempt to play DVD may cause such a high

level of noise that it may be harmful to your ears and damage your speakers.

2. Audio output from the player‘s audio output connectors is converted to 48 kHz as well as audio from the digital audio output connector.

To enjoy high quality sound at 96 kHz, connect the amplifier or decoder directly to the audio output connectors, not to the digital audio output

connector. (Select “No” at the “PCM Down Conversion”.)

Digital audio output connector

“Audio” setting

PCM Down Conversion Dolby Digital DTS Digital Surround

Downloaded From Disc-Player.com Denon Manuals

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments

Denon DVM-4800 Operations Instructions Page 53

Comments to this Manuals

Related products and manuals for DVD players Denon DVM-4800