Denon AVR-2310CI User Manual download pdf (Page 35)

Getting Started

Connections Playback Remote Control Information Troubleshooting

Speciﬁ cations

ENGLISH

Multi-Zone

Setting items Setting contents

Auto Surround Mode

Make setting for memorizing

surround mode setting for

each input signal type.

ON : Memorize settings. Most recently stored surround mode is

automatically selected.

OFF : Do not memorize settings. Surround mode does not change

according to input signal.

The auto surround mode function lets you store in the memory the

surround mode last used for playing the four types of input signals

listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals

e Dolby Digital and DTS multi-channel signals

r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.)

NOTE

When playing in the PURE DIRECT mode, the surround mode does not

change even if the input signal is changed.

EQ Customize

Set so that unused equalizer

settings are not displayed

when is used.

Audyssey Byp. L/R

Audyssey Flat / Manual

Used

Not Used

NOTE

• Set so that the “Audyssey Byp. L/R” and “Audyssey Flat” settings can be

made when the Audyssey Auto Setup procedure is performed.

• Equalizer settings for which “Not Used” is set with the Quick Select

function cannot be stored and called out.

•

Setting items Setting contents

EXT.IN SW Level

Set the playback level of the

analog subwoofer signals

input from the external input

terminals (EXT. IN).

+15dB : This is the recommended level.

+10dB / +5dB / 0dB : Select the level according to the player being used.

2CH DIRECT/STEREO

Make speaker settings for 2-

channel mode playback.

Setting : Select the method for setting the speakers used in the 2-channel

direct and stereo playback modes.

Basic : The settings at “Speaker Setup” (vpage 28) are applied.

Custom : Make separate settings for 2-channel mode.

Front : Set the front speaker size.

Large : Use of a large speaker that can adequately play back low

frequencies.

Small : Use of a small speaker that has inadequate playback capacity

for low frequencies.

SW : Set the presence of a subwoofer.

Yes : Use a subwoofer.

No : Select when a subwoofer is not connected.

SW Mode : Select low range signal to be reproduced by subwoofer.

LFE : Add the low frequency signal of the channel for which the speaker

size is set to “Small” to the subwoofer signal and output it.

LFE+Main : Add the low frequency signal of all channels to the

subwoofer signal and output it.

Crossover : Outputs at below set frequency, each speaker’s bass signal

output from the subwoofer.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz

/ 250Hz

Distance FL / Distance FR : Select the speaker you want to set, and set

the CH Level. Set the value that is closest to the measured distance.

0.0ft ~ 60.0ft (12.0ft) / 0.00m ~ 18.00m(3.6m)

CH Level FL/ CH Level FL FR : Select the speaker you want to set, and

set the CH Level. Adjust the level of each channel.

–12.0dB ~ +12.0dB(0.0dB)

•

Make settings for audio playback.

Making the audio settings (Audio Setup)

Default settings are underlined.

Making detailed settings (Manual Setup)

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Settings

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 77 78

Comments to this Manuals

No comments

Denon AVR-2310CI User Manual Page 35

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-2310CI