Denon AVR-2310CI User Manual download pdf (Page 55)

2

Getting Started

Connections Remote Control Information Troubleshooting

Speciﬁ cations

ENGLISH

Multi-ZoneSettings

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Setting contents

OFF : Do not use RESTORER.

Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.

Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.

Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.

• The default setting for “iPod” is “Mode3”. All others are set to “OFF”.

• When set to something other than “OFF”, “ ” is displayed.

• This can also be set by pressing during playback.

OFF Mode 1

(RESTORER 64)

Mode 2

(RESTORER 96)

Mode 3

(RESTORER HQ)

Setting contents

0ms ~ 200ms

• If you wish to adjust the “Audio Delay” while playing HDMI or component video signals, press u

to set “GUI” to “OFF”. This way the audio delay can be adjusted while watching the picture. (Press

the u again. The display switches to the display of the menu screen only.)

• This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with “Front

Speaker” set to “Large”, “Tone Control” to “OFF” and “MultEQ” and “RESTORER” to “OFF”).

• When the Auto Lipsync Correction function is operating, you can set within the range 0 ~ 100 ms.

• Store “Audio Delay” for each input source.

• Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the

amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER

function generates the signals eliminated upon compression, restoring the sound to conditions near

those of the original sound before compression. It also corrects the sense of volume of the bass to obtain

richer sound with compressed audio signals.

• This can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input.

Playback

Setting items Setting contents

Contrast

Adjust picture contrast.

–6 ~ +6 (0)

Brightness

Adjust picture brightness.

0 ~ +12

Chroma Level

Adjust picture chroma level

(saturation).

–6 ~ +6 (0)

Hue

Adjust color hue.

–6 ~ +6 (0)

DNR

Reduce overall picture noise.

OFF / Low / Middle / High

Enhancer

Emphasize picture contours.

0 ~ +12

“DNR” and “Enhancer” are each effective with HDMI output.

The value set at “Picture Adjust” is stored in the memory individually for each input source.

•

This can be set when the input source is

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

With input sources other than the ones above, this can be set when “Video Select” is selected. In this

case, the original input source settings are called out.

Can be set when the “Video Convert” setting (vpage 38) is “ON”.

•

Adjusting the Sound and Picture Quality (Audio/Video Adjust)

Adjusting the Picture Quality (Picture Adjust)

Default settings are underlined.

Restoring Compressed Audio to Nearly Pre-compressed

Conditions for Playback (RESTORER)

Default settings are underlined.

Adjusting the Audio Delay Time while Watching the

Picture (Audio Delay)

Default settings are underlined.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

Comments to this Manuals

No comments

Denon AVR-2310CI User Manual Page 55

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-2310CI