Denon AVR-3600 User Manual download pdf (Page 31)

9-6 Using the DSP surround simulation

1. Select the surround mode according to the input source.

MONO 5CH STEREO MODE

The surround mode switches in the

foibwing order each time the DSP

SIMULATION button is pressed:

SUPER STADIUM-

-MATRIX ^

ROCK ARENA

------

JAZZ CLUB

— CLASSIC CONCERT-^

--------------

2. Press the ENTER button and call out the "Menu" screen from the

on screen display.

3. Use the CURSOR buttons to specify "Surround Parameters",

(screen 26)

4. Press the ENTER button.

The screen switches.

5. Move the cursor on the screen and make the various settings,

(screen 27)

A CURSOR CURSOR

6. After the above settings are completed, press the ENTER button.

( screen 27 )

® Surround modes and parameters

ROOM SIZE .................. "Room size" refers to the size of the sound field. —There are five parameters; "Small" "med.S." ■<■"* "medium" +"*•

"med.L," ■<”+ "large"

EFFECT LEVEL

............

"Effect level" refers to the strength of the effect sounds. If the sound becomes distorted, lower the level. Parameter

"1" - "15"

DELAY

..........................

This can be set to between 0 and 360 msec for the MATRIX mode.

NOTE: When "Default" is selected and the @ cursor button is pressed, "CINEMA EQ" and "D.COMP" are automatically set to "OFF",

"ROOMSIZE" is set to "medium", "EFFECT LEVEL" is set to "10" and "DELAY TIME" is set to "30 ms".

NOTES:

modes. Other surround mode buttons will not function during the Dolby Digital AC~3 signal playback.

® When the mode is switched to Dolby Digital AC-3 encoded signals while playing PCM digital signals or analog signals in the iVIONO,5CH STEREO,

SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT or MATRIX Surround mode, the mode is forcibly switched to the Dolby

Surround mode.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

No comments

Denon AVR-3600 User Manual Page 31