Denon AVR-3600 User Manual download pdf (Page 34)

10-6 Recalling preset stations with the on screen display

1. Press the ENTER button and call out the "Menu" screen from the

on screen display.

2. Use the CURSOR buttons to specify "Tuner Preset Stations",

{screen 29)

CURSOR(CURSOR

3. Press the ENTER button.

The screen switches to the "Tuner Preset Stations" screen, {screen

30)

4. Use the CURSOR buttons to select the station you want to tune in.

V rv

If the selected station is not displayed on the on screen display, use

the CURSOR buttons to switch the displayed page.

CURSOR

5. Once the desired station is selected, press the CURSOR button to

actually tune it in.

6. Once the desired station is tuned in, press the ENTER button. The

"Menu" screen is displayed.

ENTER

7. Use the CURSOR buttons to specify "Menu Off".

8. Press the ENTER button.

ill LAST FUNCTION IVlEiMORY

System Setup

A Surround Parameters

Tuner Preset Stations

Menu Off

( screen 29 )

Tuner Preset Stations

A1fm 87.50MHz

A2fm 88.1 OMhz

A A3fm 89.30Mhz

? A5fm 97.90Mhz

A6fm104.10Mhz

A7fm 106.50MHz

A8fm107.90Mhz

{screen 30

® This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power

is switched off.

This function eliminates the need to perform complicated resettings when the power is switched on.

® The unit is also equipped with a back-up memory. This function provides approximately one week of memory storage when the main unit's power

switch is off and with the power cord disconnected.

12 INITIALIZATION OF THE IVIICROPROCESSOR

When the indication of the display is not normal or when the operation

of the unit does not shows the reasonable result, the initialization of the

microprocessor is required by the following procedure.

1. Switch off the unit using the main unit's power switch.

2. Hold the following AC-3 RF button and PHONO button, and turn the

main unit's power switch on.

3. Check that the entire display is flashing with an interval of about 1

second, and release your fingers from the 2 buttons and the micro

processor will be initialized.

1 2 ... 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Denon AVR-3600 User Manual Page 34

Comments to this Manuals