Denon AVR-1611 Owner's Manual Page 49
- Page / 78
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
46
ENGLISH
Audio Adjust
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
Audyssey Settings
Default settings are underlined.
Set MultEQ
®
, Dynamic EQ
®
and Dynamic Volume
®
. These can be selected after Audyssey
®
Auto Setup
has been performed. For additional information on Audyssey technology, please see page 69.
NOTE
If you have not performed Auto Setup, or if you change the speaker settings after performing Auto Setup,
you may not be able to select Dynamic EQ/Dynamic Volume, and “Run Audyssey” may be displayed.
In this case, either perform Audyssey Auto Setup over again or perform “Restore” (vpage10) to return to
the settings after Audyssey Auto Setup was run.
Setting items Setting details
MultEQ
Select one equalizer from
three modes. MultEQ
corrects both time and
frequency response
problems in the listening
area based on Audyssey
Auto Setup calibration. We
recommend “Audyssey”.
MultEQ is the prerequisite
function for Dynamic EQ
and Dynamic Volume.
Audyssey : Optimize the frequency response of all speakers.
Audyssey Byp.L/R : Optimize frequency response of speakers except
front L and R speakers.
Audyssey Flat : Optimize frequency response of all speakers to flat
response.
Manual : Apply frequency response set with “Manual EQ” (vpage47).
OFF : Turn “MultEQ” equalizer off.
• “Audyssey”, “Audyssey Byp. L/R” and
“Audyssey Flat” can be selected after Audyssey
Auto Setup has been performed. “Audyssey” is
automatically selected after performing Audyssey
Auto Setup. When “Audyssey”, “Audyssey Byp.
L/R” or “Audyssey Flat” is selected,
illuminates.
• After running Audyssey Auto Setup, if the
Speaker Configuration, Distance, Channel
Level, and Crossover Frequency have changed
without increasing the number of speakers
measured, only illuminates.
• Pressing MULTEQ on the remote control unit
or the main unit makes this setting.
NOTE
• “MultEQ” and “Manual” cannot be selected when “EQ Customize” is
set to “Not Used” (vpage52).
• When using headphones, “MultEQ” is automatically set to “OFF”.
Setting items Setting details
Dynamic EQ
®
Solve the problem of
deteriorating sound quality
as volume is decreased by
taking into account human
perception and room
acoustics.
ON : Use Dynamic EQ.
OFF : Do not use Dynamic EQ.
• is displayed when set to “ON”.
• Buttons on the remote control unit or main unit
can be used for operations.
GOperations with the remote control unitH
Press DYN EQ/VOL.
Each time DYN EQ/VOL is pressed, the setting is changed as shown
below.
Dynamic EQ : ON /
Dynamic Volume : Midnight
Dynamic EQ : ON /
Dynamic Volume : Evening
Dynamic EQ : ON /
Dynamic Volume : OFF
Dynamic EQ : OFF /
Dynamic Volume : OFF
Dynamic EQ : ON /
Dynamic Volume : Day
GOperations with the main unitH
Press DYNAMIC EQ.
Each time DYNAMIC EQ is pressed,
the setting is changed as shown
below.
Dynamic EQ : ON Dynamic EQ : OFF
Reference Level Offset
Audyssey Dynamic EQ is
referenced to the standard
film mix level. It makes
adjustments to maintain
the reference response
and surround envelopment
when the volume is turned
down from 0 dB. However,
film reference level is not
always used in music or
other non-film content.
Dynamic EQ Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
0dB (Film Ref) : This is the default setting and should be used when
listening to movies.
5dB : Select this setting for content that has a very wide dynamic range,
such as classical music.
10dB : Select this setting for jazz or other music that has a wider dynamic
range. This setting should also be selected for TV content as that is usually
mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material
that is mixed at very high listening levels and has a compressed dynamic
range.
Setting is enabled when “Dynamic EQ” is “ON” (vpage46).
- AVR-1611 1
- IMPORTANT SAFETY 2
- INSTRUCTIONS 2
- ESPAÑOLFRANCAISENGLISH 3
- Getting started 4
- Cautions on handling 5
- Features 5
- Speakers 7
- Blu-ray Disc player and TV 8
- Power on 9
- FL SW C FR 10
- Preparation 11
- Speaker Detection 11
- Measurement 11
- Calculating 12
- Parameter Check 13
- Error messages 13
- Play back disc 14
- Basic version 15
- Connections 16
- Important information 17
- Connecting a TV 19
- Cables used for connections 20
- Connecting an antenna 21
- Playback (Basic operation) 22
- Adjusting the master volume 23
- Playing an iPod 24
- SEARCH to set the 25
- Tuning in radio stations 26
- Standard playback 27
- (Dolby Digital, DTS etc.) 28
- Stereo playback 29
- Direct playback 29
- Advanced version 30
- Connect (vpage29) 31
- Set up speakers (vpage31) 31
- 6.1-channel connection 32
- Front A/B connection 33
- 2-channel connection 33
- Bi-amp connection 33
- Set up speakers 34
- Playback (Advanced operation) 35
- To cancel the sleep timer 36
- (Fader function) 36
- Playback in ZONE2 37
- (Separate room) 37
- Playback 38
- Quick select function 38
- How to make detailed settings 39
- D e f a u l t ? : • N o 40
- Inputting characters 41
- Input Setup 42
- Auto Preset 43
- Preset Skip 43
- Preset Name 44
- Input Assign 44
- Input Mode 45
- Audio Adjust 46
- Surround Parameter 47
- n For 2-channel sources 48
- n For Multi-channel sources 48
- Audyssey Settings 49
- Manual EQ 50
- Manual Setup 51
- Speaker Setup 52
- HDMI Setup 54
- Audio Setup 55
- ZONE2 Setup 56
- Option Setup 56
- DIMMER is pressed, the 57
- Information 58
- Operating AV equipment 59
- Registering preset codes 59
- Operating components 61
- n TV operation 62
- TV operation 62
- Part names and functions 64
- Rear panel 65
- Remote control unit 66
- Other information 67
- Surround 68
- Symbols in the table 70
- Explanation of terms 72
- Troubleshooting 74
- Resetting the microprocessor 75
- Specifications 76
- D&M Holdings Inc 78
Related products and manuals for Receiver Denon AVR-1611
Receiver Denon AVR-1611 User Manual
(79 pages)
(79 pages)
Receiver Denon AVR-2809 User Manual
(26 pages)
(26 pages)
Receiver Denon AVR-2312CI User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-1611 Owner's Manual
(80 pages)
(80 pages)
Receiver Denon AVR-891 User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-2311CI User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-4311 User Manual
(53 pages)
(53 pages)
Receiver Denon AVR-2313CI User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-1912 User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-X7200W User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-1612 User Manual
(104 pages)
(104 pages)
Receiver Denon AVR-1311 User Manual
(64 pages)
(64 pages)
Receiver Denon AVR-3313CI User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-X2000 User Manual
(220 pages)
(220 pages)
Receiver Denon AVR-3808 Owner's Manual
(108 pages)
(108 pages)
© 2020, manymanuals.com. All rights reserved. | 0.706 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals