Denon AVR-1611 Owner's Manual download pdf (Page 7)

ENGLISH

NOTE

• Connect so that the speaker cable core wires

do not protrude from the speaker terminal.

The protection circuit may be activated if the

core wires touch the rear panel or if the + and –

sides touch each other (vpage70 “Protection

Circuit”).

• Never touch the speaker terminals while the

power supply is connected. Doing so could

result in electric shock.

• Use speakers with the speaker impedances

shown below.

Speaker terminals

Speaker

impedance

FRONT

6 – 16 Ω

CENTER

SURROUND

SURR.BACK / AMP ASSIGN

Install

1 2 4 53

This unit can perform 2.0/2.1 to 7.1-channel surround playback.

Here, we explain setup using the example of 5.1-channel speaker

playback.

FL FR

120˚

22 – 30˚

Listening position

FL Front speaker (L) • Install the surround speakers in a

position 2 to 3 ft (60 to 90 cm) higher

than ear level.

2 – 3 ft /

60 – 90 cm

Front

speaker

Surround

speaker

GViewed from the sideH

FR Front speaker (R)

C Center speaker

SW Subwoofer

SL Surround speaker (L)

SR Surround speaker (R)

Connect

1 2 4 53

The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers.

See page 28 for the installation, connection and setup methods for speakers other than 5.1-channel speakers.

Speakers

Carefully check the left (L) and right (R)

channels and + (red) and – (black) polarities

on the speakers being connected to the

this unit, and be sure to interconnect the

channels and polarities correctly.

Connecting the speaker cables

Peel off about 0.03 ft/10 mm of sheathing from

the tip of the speaker cable, then either twist the

core wire tightly or terminate it.

When using a banana plug

Tighten the speaker terminal ﬁrmly before

inserting the banana plug.

1 2 3 4 5 6 7 8 9 10 11 12 ... 77 78

Comments to this Manuals

No comments

Denon AVR-1611 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-1611